58905B
1.REMOVE COOL BOX CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 6 screws and console compartment door sub-assembly.
58907A
2.REMOVE COOLING BOX DOOR HINGE SUB-ASSEMBLY
Remove the 6 screws.
|
Protective Tape |
Put protective tape around the instrument side panel.
Using a moulding remover, detach the 5 claws.
Remove the 4 screws the console compartment door hinge sub-assembly.
58860A
3.REMOVE CONSOLE BOX REGISTER ASSEMBLY
88520
4.REMOVE COOLING BOX ASSEMBLY
Remove the 6 screws.
Detach the 12 claws and remove the cooling box assembly.
88950A
5.REMOVE COOLING BOX AMPLIFIER ASSEMBLY
Remove the 2 screws.
Disconnect the connector and remove the cooling box amplifier assembly.
88539E
6.REMOVE NO. 3 COOLER UNIT DRAIN HOSE
Remove the No. 3 cooler unit drain hose.
88605
7.REMOVE NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY
Remove the packing.
Disconnect the 3 connectors and remove the No. 1 cooler wiring harness sub-assembly.
88601
8.REMOVE COOLER CONTROL SWITCH SUB-ASSEMBLY
Detach the 2 claws and remove the cooler control switch sub-assembly.
88522
9.REMOVE COOLING UNIT DOOR
Remove the packing.
Remove the 8 screws, 2 bolts and cooling unit door.
88501D
10.REMOVE NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY
Remove the 3 screws, 5 bolts and air duct.
Remove the 5 holding springs.
Remove the 4 bolts.
Remove the cooling unit case.
Remove the cooler evaporator assembly.
Detach the 2 claws.
Loosen the 2 nuts and remove the No. 1 liquid tube, cooler magnet valve assembly and No. 2 cooler evaporator sub-assembly.
87103F
11.REMOVE COOL BOX BLOWER WITH FAN MOTOR SUB-ASSEMBLY