87103F
1.INSTALL COOL BOX BLOWER WITH FAN MOTOR SUB-ASSEMBLY
88501D
2.INSTALL NO. 2 COOLER EVAPORATOR SUB-ASSEMBLY
Tighten the 2 nuts and install the liquid tube, cooler magnet valve and No. 2 cooler evaporator sub-assembly.
Attach the 2 claws.
Install the cooler evaporator assembly.
Install the cooling unit case.
Install the 4 bolts.
Install the 5 holding springs.
Install the air duct with the 3 screws and 5 bolts.
88522
3.INSTALL COOLING UNIT DOOR
Install the cooling unit door with the 8 screws and 2 bolts.
Install new packing.
88601
4.INSTALL COOLER CONTROL SWITCH SUB-ASSEMBLY
Attach the 2 claws to install the cooler control switch sub-assembly.
88605
5.INSTALL NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY
Connect the 3 connectors and install the No. 1 cooler wiring harness sub-assembly.
Install new packing.
88539E
6.INSTALL NO. 3 COOLER UNIT DRAIN HOSE
Install the No. 3 cooler unit drain hose.
88950A
7.INSTALL COOLING BOX AMPLIFIER ASSEMBLY
Install the cooling box amplifier assembly with the 2 screws.
Connect the connector.
88520
8.INSTALL COOLING BOX ASSEMBLY
Attach the 12 claws to install the cooling box assembly.
Install the 6 screws.
58860A
9.INSTALL CONSOLE BOX REGISTER ASSEMBLY
58907A
10.INSTALL COOLING BOX DOOR HINGE SUB-ASSEMBLY
Install the console compartment door hinge sub-assembly with the 4 screws.
Attach the 5 claws.
Install the 6 screws.
58905B
11.INSTALL COOL BOX CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Install the console compartment door sub-assembly with the 6 screws.