Do not disconnect the hoses indicated in the illustration.
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
77131C
2.REMOVE NO. 1 FUEL SUB-TANK
Disconnect the fuel pump connector.
Disconnect the jet pump labeled A from the No. 1 fuel sub-tank.
| *1 | Jet Pump A |
| *2 | Jet Pump B |
Disconnect the jet pump labeled B from the No. 1 fuel sub-tank.
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tape the screwdriver tip before use.
Do not damage the No. 1 fuel sub-tank.
23221
3.REMOVE FUEL PUMP
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
| *1 | Fuel Filter Case |
Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
Remove the O-ring and fuel pump spacer from the fuel pump.
| *1 | O-Ring |
| *2 | Fuel Pump Spacer |
23070
4.REMOVE FUEL MAIN VALVE ASSEMBLY
Remove the fuel main valve from the fuel filter case.
| *1 | Fuel Filter Case |
| *2 | O-Ring |
Remove the 2 O-rings from the fuel main valve.