Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2017.08–2020.08
RM27T0E _58 Vehicle Interior _053736 PRE-CRASH SAFETY _0261101 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  OPERATION CHECK  


CHECK PRE-CRASH SAFETY SYSTEM SETTING


a.

Turn the ignition switch to ON.


b.

Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-crash safety system turns on.

HINT:

When the ignition switch is turned to ON, the PCS will turn on. This can be changed through a customize setting using the GTS.



c.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.



CHECK PRE-CRASH SAFETY SYSTEM SENSITIVITY SETTING


a.

Turn the ignition switch to ON.


b.

Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

Check that the sensitivity setting displayed on the multi-information display changes between "Far", "Mid", and "Near" accordingly.

·

The default setting is "Mid".

·

The Change PCS Sensitivity setting selected before turning the ignition switch off continues when the ignition switch is turned from off to ON, but this can be changed with customization settings using the GTS.