for 1GR-FE, 2TR-FE:
The driving support ECU assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system, the driving support ECU assembly is notified via CAN communication and stores DTC C1A63.
for 1KD-FTV, 1GD-FTV:
The driving support ECU assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or ECD system, the driving support ECU assembly is notified via CAN communication and stores DTC C1A63.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A63 | Other System Malfunction | With the ignition switch is ON, the driving support ECU assembly receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 2 seconds or more. | ·
SFI system (for 1GR-FE, 2TR-FE) ·
ECD system (for 1KD-FTV, 1GD-FTV) |
If DTC C1A63 is output by the pre-crash safety system, perform troubleshooting for the SFI system or ECD system.
for 1GR-FE: Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
for 2TR-FE: Click hereEngine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
for 1KD-FTV: Click hereEngine / Hybrid System>1KD-FTV (ENGINE CONTROL)>ECD SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
for 1GD-FTV: Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
for 1GD-FTV (w/ Urea SCR system): Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT