Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD DEICER SWITCH (w/ Heated Windshield Defroster System) › from 2017.08
RM27T0E _59 Vehicle Exterior _053742 WINDOW / GLASS _0327159 WINDSHIELD DEICER SWITCH(w/ Heated Windshield Defroster System) G

WINDOW / GLASS  WINDSHIELD DEICER SWITCH(w/ Heated Windshield Defroster System)  INSPECTION  


PROCEDURE

Hide 84794 1.INSPECT FRONT WIPER DEICER SWITCH

a.
E377033C04
1.135,1.656 1.469,1.302 true 2.042,1.688 1.958,1.302 true 1.271,1.25 0.677,1.25 true 1.625,1.302 1.542,1.719 true 2.167,1.25 2.573,1.25 true 0.104,0.104 0.417,0.302 0.313,0.198 10 false *a 1.042,1.719 1.354,1.917 0.313,0.198 10 false IG 2.052,1.75 2.365,1.948 0.313,0.198 10 false E 2.677,1.167 3.292,1.365 0.615,0.198 10 false ILL- 1.5,1.75 1.656,1.948 0.156,0.198 10 false D 0.354,1.156 0.969,1.354 0.615,0.198 10 false ILL+
*a Component without harness connected
(Front Wiper Deicer Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 5 (IG) Front wiper deicer switch on Below 1 Ω
Front wiper deicer switch off 10 kΩ or higher


If the result is not as specified, replace the front wiper deicer switch.


b.

Apply battery voltage to the connector and check the LED illumination.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 5 (IG)
Battery negative (-) → 4 (D)
Indicator LED illuminates
Battery positive (+) → 6 (ILL+)
Battery negative (-) → 1 (ILL-)
Illumination LED illuminates


If the result is not as specified, replace the front wiper deicer switch.