Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION RECEIVER › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053721 NAVIGATION / MULTI INFO DISPLAY _0260988 NAVIGATION RECEIVER A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION RECEIVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55670A 1.INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Attach the 7 claws to install the center instrument panel register assembly.


Hide 86212C 2.INSTALL NO. 2 RADIO RECEIVER BRACKET

a.

Install the No. 2 radio receiver bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86211J 3.INSTALL NO. 1 RADIO RECEIVER BRACKET

a.

Install the No. 1 radio receiver bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86120L 4.INSTALL NAVIGATION RECEIVER ASSEMBLY

a.

Connect each connector.


b.
E374517

Insert the navigation receiver assembly and attach the 2 guides, 7 clips on the backside of the navigation receiver assembly.

NOTICE:

When inserting the receiver, do not press the knobs on it.



c.

Install the navigation receiver assembly with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 84010A 5.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION.