Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75982B
1.REMOVE FENDER STRIPE LH
When removing the fender stripe LH, heat the vehicle body and fender stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
75974F
2.REMOVE FRONT SIDE PANEL STRIPE LH
When removing the front side panel stripe LH, heat the vehicle body and front side panel stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back an edge of the front side panel stripe LH and pull it parallel to the vehicle body to remove it.
75997C
3.REMOVE REAR BODY STRIPE LH
When removing the rear body stripe LH, heat the vehicle body and rear body stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back an edge of the rear body stripe LH and pull it parallel to the vehicle body to remove it.
75994D
4.REMOVE REAR UPPER QUARTER STRIPE LH
When removing the rear upper quarter stripe LH, heat the vehicle body and rear upper quarter stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back an edge of the rear upper quarter stripe LH and pull it parallel to the vehicle body to remove it.
75992A
5.REMOVE QUARTER STRIPE LH
When removing the quarter stripe LH, heat the vehicle body and quarter stripe LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back an edge of the quarter stripe LH and pull it parallel to the vehicle body to remove it.