Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA › 2017.08–2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0327508 FRONT CAMERA A

CRUISE CONTROL  FRONT CAMERA  INSTALLATION  


PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY (w/ Camera Heater)

NOTICE:
B485920

Do not touch the internal components of the forward recognition with heater hood sub-assembly or press on the heater when working on the forward recognition with heater hood sub-assembly.


a.
B485925C02
1.865,1.49 2.323,1.688 0.458,0.198 10 false (1) 1.156,1.094 1.365,1.313 0.208,0.219 10 true (2)
V100155

Heater Area


Attach the guide in the direction indicated by the arrow (1) in the illustration.


b.

Attach the 2 claws in the direction indicated by the arrow (2) in the illustration.

NOTICE:

Do not press the heater area.



c.
B485926C01
0.469,3.979 0.26,3.625 true 0.083,3.458 0.396,3.656 0.313,0.198 10 false *1 3.135,3.833 3.406,4.083 0.271,0.25 10 false (1) 2.781,4.104 3.24,4.302 0.458,0.198 10 false (2) 2.167,4.313 2.625,4.51 0.458,0.198 10 false (3) 1.51,3.948 1.969,4.146 0.458,0.198 10 false (4) 1.292,3.833 1.75,4.031 0.458,0.198 10 false (5) 1.635,3.49 1.896,3.698 0.26,0.208 10 true (6) 1.031,3.667 1.49,3.865 0.458,0.198 10 false (7)
*1 Wire Harness


Attach the 7 guides in the order shown in the illustration to install the wire harness to the forward recognition bracket.


d.
B485922

Attach the connector clamp to install the forward recognition with heater hood sub-assembly.


e.
B485921

Connect the connector.


Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

·

Replace the forward recognition camera if there is any foreign matter on the camera lens.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, forward recognition camera system, lane departure alert system, road sign assist system or pre-crash safety system may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

·

If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera.



a.
B485927

When using a new forward recognition camera:

i.

Remove the protective film.

NOTICE:

Do not touch the camera lens after removing the protective film.




b.
B485928

Attach the 4 guides to install the forward recognition camera as shown in the illustration.

NOTICE:

Do not touch the camera lens.



c.

Connect the connector.


Hide 86464A 3.INSTALL FORWARD RECOGNITION LATCH

NOTICE:

Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.


a.
B485929C01
1.625,2.552 1.5,2.406 true 1.344,2.292 1.51,2.49 0.167,0.198 10 false *a
*a Make sure that the claw is securely attached.


Attach the 4 guides and 2 claws to install the forward recognition camera as shown in the illustration.

NOTICE:

Check that the forward recognition latch is securely installed.



Hide 86466D 4.INSTALL NO. 1 FORWARD RECOGNITION COVER

a.
B485930

Attach the 2 guides and 2 clips as shown in the illustration to install the No. 1 forward recognition cover.

NOTICE:

When installing, press the cover parallel to the windshield glass surface and install.



Hide 86466E 5.INSTALL NO. 2 FORWARD RECOGNITION COVER

a.
B485931N01
0.49,4.146 0.948,4.344 0.458,0.198 10 false (1) 2.469,4.01 2.927,4.208 0.458,0.198 10 false (2)

Attach the 2 guides in direction indicated by arrow (1) shown in the illustration.


b.

Attach the 2 claws in the direction of arrow (2) shown in the illustration to install the No. 2 forward recognition cover.

NOTICE:

If the 2 claws are attached separately they may become damaged. Therefore, attach them at the same time.



Hide 8646C 6.ADJUST FORWARD RECOGNITION CAMERA

a.

If the forward recognition camera has been replaced or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)