84010A
1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY
Check that the illumination.
| *a | Component without harness connected
(Integration Control and Panel Assembly) |
Apply battery voltage to the connector and check the Indicator.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 2 (ILL+)
Battery negative (-) → 4 (GND) |
Integration control and panel assembly illuminates |
If the result is not as specified, there may be a malfunction in the integration control and panel assembly.
| *a | Component without harness connected
(Integration Control and Panel Assembly) |
Check that the clock.
Apply battery voltage to the connector and check the clock.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 5 (IG+)
Battery negative (-) → 4 (GND) |
Clock is displayed |
If the result is not as specified, there may be a malfunction in the integration control and panel assembly.