84330
1.INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY (CLEARANCE WARNING INDICATOR)
| *a | Component without harness connected
(Clearance Warning Indicator Assembly) |
Inspect the indicator operation.
for A:
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 10 (BD)
Battery negative (-) → Terminal 6 (OP) |
LED illuminates |
If the result is not as specified, replace the hazard warning signal switch assembly (clearance warning indicator).
for B:
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 10 (BD)
Battery negative (-) → Terminal 14 (BK) |
LED illuminates |
If the result is not as specified, replace the hazard warning signal switch assembly (clearance warning indicator).
for C:
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 10 (BD)
Battery negative (-) → Terminal 13 (RL) |
LED illuminates |
If the result is not as specified, replace the hazard warning signal switch assembly (clearance warning indicator).
for D:
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 10 (BD)
Battery negative (-) → Terminal 5 (RR) |
LED illuminates |
If the result is not as specified, replace the hazard warning signal switch assembly (clearance warning indicator).
Inspect the illumination operation.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 11 (ILL+)
Battery negative (-) → Terminal 7 (ILL-) |
LED illuminates |
If the result is not as specified, replace the hazard warning signal switch assembly (clearance warning indicator).