Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH(w/ Combination Switch) › from 2017.08
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0328335 VSC OFF SWITCH(w/ Combination Switch) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH(w/ Combination Switch)  INSPECTION  


PROCEDURE

Hide 84970 1.INSPECT COMBINATION SWITCH ASSEMBLY (VSC OFF SWITCH)

a.
C281308C15
2.5,0.927 2.5,0.25 2.5,0.25 2.667,0.25 true 0.583,1.75 0.75,1.75 0.75,1.75 0.75,1.25 true 0.438,1.677 0.708,1.896 0.271,0.219 10 false E 2.719,0.167 3.094,0.396 0.375,0.229 10 false OFF 0.073,0.021 0.417,0.24 0.344,0.219 10 false *a
*a Component without harness connected
Combination Switch Assembly (VSC OFF Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (OFF) - 24 (E) ON Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the combination switch assembly (VSC OFF switch).


b.
C281308C16
0.74,0.958 0.74,0.281 0.74,0.281 0.906,0.281 true 2.563,1.74 2.729,1.74 2.729,1.74 2.729,1.24 true 2.26,1.646 2.563,1.865 0.302,0.219 10 false ILL+ 0.969,0.177 1.344,0.406 0.375,0.229 10 false ILL- 0.073,0.021 0.417,0.24 0.344,0.219 10 false *a
*a Component without harness connected
Combination Switch Assembly (VSC OFF Switch)


Apply battery voltage between the terminals of the switch, and check the illumination condition of the combination switch assembly (VSC OFF switch).

Standard:
Measurement Condition Specified Condition
Battery positive (+) → 13 (ILL+)
Battery negative (-) → 12 (ILL-)
Illuminates


If the result is not as specified, replace the combination switch assembly (VSC OFF switch).