The ECM receives signals from the skid control ECU via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0122 | Lost Communication with Vehicle Dynamics Control Module | While the vehicle speed is 40 km/h (25 mph) or more and the cruise control main switch (ON-OFF button) is on, signals cannot be received from the skid control ECU for 1 second or more. | ·
CAN communication system ·
ECM ·
Skid control ECU (Brake actuator assembly)*1 ·
Skid control ECU (Master cylinder solenoid)*2 |
*1: for Vacuum Brake Booster
*2: for Hydraulic Brake Booster
Clear the DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Drive the vehicle at a speed for which cruise control operation is possible.
Turn the cruise control system on using the cruise control main switch (ON-OFF button).
Push the cruise control main switch to -SET to begin control of vehicle speed using the cruise control system.
Check for DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| DTC U0122 is not output | A |
| DTC U0122 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B