Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL PUMP (for Double Tank Type) › from 2017.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260579 FUEL PUMP(for Double Tank Type) A

1GD-FTV FUEL  FUEL PUMP(for Double Tank Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A410208

Do not disconnect the hoses indicated in the illustration.


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

a.
A152630E02
2.413,0.229 2.618,0.381 0.204,0.152 10 *1 1.85,0.317 2.383,0.317 false 2.423,1.019 2.627,1.171 0.204,0.152 10 *2 1.859,1.107 2.392,1.107 false 2.51,2.739 2.715,2.891 0.204,0.152 10 *3 1.946,2.827 2.48,2.827 false

Install the spacer and a new O-ring to the fuel pump.

Text in Illustration
*1 O-Ring
*2 Spacer
*3 Fuel Pump


b.

Apply a light coat of diesel fuel to the O-ring of the fuel pump.


c.

Push in the fuel pump to the fuel suction plate sub-assembly.


Hide 2.CONNECT JET PUMP

a.
A152629

Set the jet pump into the No. 1 fuel sub-tank. Then slide the jet pump downward to install it.

HINT:

Make sure that the jet pump is attached at the 2 positions as shown in the illustration.



Hide 77785 3.INSTALL FUEL PUMP HARNESS

a.

Connect the fuel pump harness connector to the fuel suction plate sub-assembly.


b.

Connect the fuel pump harness connector to the fuel pump.


Hide 77024A 4.INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY

a.
A410209

Attach the 3 claws to the claw holes to install the fuel suction plate sub-assembly.