Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Start Function) › from 2017.08
RM27T0E _58 Vehicle Interior _053731 THEFT DETERRENT / KEYLESS ENTRY _0261052 ENTRY AND START SYSTEM(for Start Function) D

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Start Function)  OPERATION CHECK  


OPERATION DESCRIPTION


NOTICE:

Make sure that the entry and start system (for Start Function) has not been canceled before performing this inspection.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>CUSTOMIZE PARAMETERS


*1: for Automatic Transmission

*2: for Manual Transmission


a.

Push-button start function (w/ Multi-information Display (TFT Display Type)):

i.

When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal*1 or clutch pedal*2 is depressed, the engine is started by pressing the engine switch.


ii.

When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal*1 or clutch pedal*2 is not depressed, the power source mode is changed by pressing the engine switch. The power source mode changes in the following order every time the engine switch is pressed: off → on (ACC) → on (IG) → off.


iii.
B345612C01
0.24,0.323 0.552,0.521 0.313,0.198 10 false *a
*a "ACCESSORY" Display


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed while not depressing the brake pedal*1 or clutch pedal*2, the power source mode changes to on (ACC) and "ACCESSORY" is displayed on the multi-information display.


iv.
B360514C01
0.167,0.167 0.333,0.333 0.167,0.167 10 false *a
*a "IGNITION ON" Display


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed 2 times without depressing the brake pedal*1 or clutch pedal*2, the power source mode changes to on (IG) and "IGNITION ON" is displayed on the multi-information display.


v.
B491750C01
0.833,0.344 1.146,0.5 0.313,0.156 10 false *A 2.438,0.333 2.75,0.49 0.313,0.156 10 false *B 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*A for Automatic Transmission
*B for Manual Transmission
*a Entry Warning Light Display


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the brake pedal*1 or clutch pedal*2 is depressed while the shift lever is in P*1, the entry warning light is displayed on the multi-information display.


vi.

The engine will start if the engine switch is pressed when the entry warning light is displayed.



b.

Push-button start function (w/ Multi-information Display (Segment Display Type)):

i.

When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal*1 or clutch pedal*2 is depressed, the engine is started by pressing the engine switch.


ii.

When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal*1 or clutch pedal*2 is not depressed, the power source mode is changed by pressing the engine switch. The power source mode changes in the following order every time the engine switch is pressed: off → on (ACC) → on (IG) → off.


iii.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light blinks green


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed while not depressing the brake pedal*1 or clutch pedal*2, the power source mode changes to on (ACC) and entry warning light in the combination meter assembly blinks green.


iv.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light blinks green


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed 2 times without depressing the brake pedal*1 or clutch pedal*2, the power source mode changes to on (IG) and entry warning light in the combination meter assembly blinks green.


v.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light illuminates green


After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the brake pedal*1 or clutch pedal*2 is depressed while the shift lever is in P*1, the entry warning light in the combination meter assembly illuminates green.


vi.

The engine will start if the engine switch is pressed when the entry warning light is illuminated.



c.

Changing the power source mode when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (w/ Multi-information Display (TFT Display Type)):

i.

Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.


ii.

While depressing the brake pedal*1 or clutch pedal*2 and facing the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.


iii.
B360514C01
0.167,0.167 0.333,0.333 0.167,0.167 10 false *a
*a "IGNITION ON" Display


A buzzer in the combination meter assembly will sound and the power source mode changes to on (IG) and "IGNITION ON" is displayed on the multi-information display.


iv.

Pressing the engine switch without depressing the brake pedal*1 or clutch pedal*2 turns the power source mode from on (IG) to off.



d.

Changing the power source mode when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (w/ Multi-information Display (Segment Display Type)):

i.

Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.


ii.

While depressing the brake pedal*1 or clutch pedal*2 and facing the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.


iii.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light blinks green


A buzzer in the combination meter assembly will sound and the power source mode changes to on (IG) and entry warning light in the combination meter assembly blinks green.


iv.

Pressing the engine switch without depressing the brake pedal*1 or clutch pedal*2 turns the power source mode from on (IG) to off.



e.

Starting the engine when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (w/ Multi-information Display (TFT Display Type)):

i.

Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.


ii.

While depressing the brake pedal*1 or clutch pedal*2 with the shift lever in P*1 and facing the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.


iii.
B491750C01
0.833,0.344 1.146,0.5 0.313,0.156 10 false *A 2.438,0.333 2.75,0.49 0.313,0.156 10 false *B 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*A for Automatic Transmission
*B for Manual Transmission
*a Entry Warning Light Display


A buzzer in the combination meter assembly will sound, the power source mode changes to on (IG) and the entry warning light will be displayed on the multi-information display.


iv.

Press the engine switch with the brake pedal*1 or clutch pedal*2 depressed to start the engine.



f.

Starting the engine when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (w/ Multi-information Display (Segment Display Type)):

i.

Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.


ii.

While depressing the brake pedal*1 or clutch pedal*2 with the shift lever in P*1 and facing the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.


iii.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light illuminates green


A buzzer in the combination meter assembly will sound, the power source mode changes to on (IG) and the entry warning light in the combination meter assembly illuminates green.


iv.

Press the engine switch with the brake pedal*1 or clutch pedal*2 depressed to start the engine.




CHECK PUSH-BUTTON START FUNCTION


*1: for Automatic Transmission

*2: for Manual Transmission


a.

Check the push-button start function:

i.
B491750C01
0.833,0.344 1.146,0.5 0.313,0.156 10 false *A 2.438,0.333 2.75,0.49 0.313,0.156 10 false *B 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a
*A for Automatic Transmission
*B for Manual Transmission
*a Entry Warning Light Display


w/ Multi-information Display (TFT Display Type)

Get into the vehicle while carrying the electrical key transmitter sub-assembly with the engine switch off. With the shift lever in P*1, check that the entry warning light is displayed when the brake pedal*1 or clutch pedal*2 is depressed. Check that the engine starts when the engine switch is pressed after the entry warning light is displayed on the multi-information display.


ii.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Entry warning light illuminates green


w/ Multi-information Display (Segment Display Type)

Get into the vehicle while carrying the electrical key transmitter sub-assembly with the engine switch off. With the shift lever in P*1, check that the entry warning light is displayed when the brake pedal*1 or clutch pedal*2 is depressed. Check that the engine starts when the engine switch is pressed after the entry warning light is illuminated.


iii.

While the brake pedal*1 or clutch pedal*2 is released and the electrical key transmitter sub-assembly is being carried, check that the power source mode changes in the following order when the engine switch is pressed: off → on (ACC) → on (IG) → off.

HINT:

for Automatic Transmission:

When the engine switch is pressed with the engine switch on (IG) and the shift lever not in P, the power source mode does not change to off, but changes to on (ACC).



iv.

With the shift lever in P*1, check that the steering lock operates when a door is opened.

HINT:

for Automatic Transmission:

When the engine switch is pressed after the vehicle is stopped, the engine stops and all the power turns off. However, if the shift lever is not in P when the engine switch is pressed with the vehicle stopped, the power source mode does not change to off, but changes to on (ACC).



v.
B485492C01
0.573,1.125 2.417,0.25 2.417,0.25 2.75,0.25 false 1.896,1.104 2.417,0.25 false 2.792,0.167 3.104,0.365 0.313,0.198 10 false *a
*a Inspection Point


Check the push-button start function operation range for the front side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the engine can be started.

NOTICE:

Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter sub-assembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.


HINT:
·

Communication may not be possible if the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the shift lever.

·

Perform this inspection for both inspection points.




vi.
B485493C01
0.656,0.979 2.5,0.25 2.5,0.25 2.75,0.25 false 2.052,0.948 2.5,0.25 false 2.781,0.177 3.094,0.375 0.313,0.198 10 false *a
*a Inspection Point


Check the push-button start function operation range for the rear side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the engine can be started.

NOTICE:

Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter sub-assembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.


HINT:
·

Communication may not be possible if the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat.

·

Perform this inspection for both inspection points.




vii.
B485495C01
1.354,1.802 2.5,0.333 2.5,0.333 2.75,0.333 false 1.99,1.25 2.5,0.333 false 2.802,0.25 3.115,0.448 0.313,0.198 10 false *a
*a Inspection Point


Check the push-button start function operation range for the luggage side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the engine can be started.

NOTICE:

Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter sub-assembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.


HINT:
·

Communication may not be possible if the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat.

·

Perform this inspection for both inspection points.






CHECK TRANSMITTER BATTERY SAVING FUNCTION


a.

Check the transmitter battery saving mode function:

i.

Press the unlock switch of the electrical key transmitter sub-assembly twice while pressing the lock switch and check that the electrical key transmitter sub-assembly LED blinks 4 times and enters transmitter battery saving mode.


ii.

Check that the entry and start system does not operate while in transmitter battery saving mode.

HINT:

To cancel transmitter battery saving mode, press a switch of the electrical key transmitter sub-assembly.





CHECK POWER SOURCE MODE CHANGING FUNCTION


a.

Check the engine switch.

i.

for Automatic Transmission:

Check that the power source mode changes according to the chart below.

Shift Position Brake Pedal Power Source Mode when Engine Switch Pressed
P Released Off → on (ACC) → on (IG) → off
P Released Engine running → off
P Released On (ACC)*1 → off
P Depressed Off → engine starts
P Depressed On (ACC) → engine starts
P Depressed On (IG) → engine starts
P Depressed Engine running → off
P Depressed On (ACC)*1 → off
N Released Off → on (ACC) → on (IG) (after power source mode changes to on (IG), power source mode changes between on (IG) and on (ACC) every time engine switch is pressed)
N Released Engine running → on (ACC)
N Depressed Off → engine starts*2
N Depressed On (ACC) → engine starts*2
N Depressed On (IG) → engine starts*2
N Depressed Engine running → on (ACC)
Not P or N Released Off → on (ACC) → on (IG) (after power source mode changes to on (IG), power source mode changes between on (IG) and on (ACC) every time engine switch is pressed)
Not P or N Released Engine running → on (ACC)
Not P or N Depressed Off → on (IG)
Not P or N Depressed On (ACC) → on (IG)
Not P or N Depressed Engine running → on (ACC)

HINT:
·

*1: This situation is only applicable when the power source mode has changed from on (IG) to on (ACC). However, this situation is not applicable when an emergency stop is performed by pressing and holding the engine switch for 2 seconds or more or by quickly pressing the engine switch 3 times or more.

·

*2: This situation is only applicable when the steering is unlocked.




ii.

for Manual Transmission:

Check that the power source mode changes according to the chart below.

Clutch Pedal Power Source Mode when Engine Switch Pressed
Released Off → on (ACC) → on (IG) → off
Released Engine running → off
Depressed Off → engine starts
Depressed On (ACC) → engine starts
Depressed On (IG) → engine starts
Depressed Engine running → off




CHECK POWER SOURCE MODE INDICATION


a.

Check the entry warning light.

i.
B491751C01
0.104,0.083 0.417,0.24 0.313,0.156 10 false *a 0.083,1.344 0.396,1.5 0.313,0.156 10 false *b 0.104,2.583 0.417,2.74 0.313,0.156 10 false *c 0.917,2.833 1.229,2.99 0.313,0.156 10 false *A 2.5,2.833 2.813,2.99 0.313,0.156 10 false *B
*A for Automatic Transmission
*B for Manual Transmission
*a "ACCESSORY" Display
*b "IGNITION ON" Display
*c Entry Warning Light Display


Multi-information Display Inspection (w/ Multi-information Display (TFT Display Type))
Power Source Mode Multi-information Display
Off
(Excluding conditions in which the engine can be started)
Off
On (ACC)
(Excluding conditions in which the engine can be started)
"ACCESSORY" displayed
On (IG)
(Excluding conditions in which the engine can be started)
"IGNITION ON" displayed
Conditions in which engine can be started*1 Entry Warning Light displayed
Engine started Off


ii.
B268083C01
0.18,0.084 0.412,0.299 0.232,0.214 10 *a
*a Smart key Indicator Blinks Green


Smart key Indicator Inspection (w/ Multi-information Display (Segment Display Type))
Power Source Mode Multi-information Display
Off
(Excluding conditions in which the engine can be started)
Off
On (ACC)
(Excluding conditions in which the engine can be started)
Blinks green
On (IG)
(Excluding conditions in which the engine can be started)
Blinks green
Conditions in which engine can be started*1 Illuminates green
Engine started Off




HINT:

*1: Indicates the conditions in which the engine can be started by pressing the engine switch while either of the following conditions is met:

·

Condition 1

All of the following conditions are met:

-

The power source mode was turned from on (IG) to on (ACC).

-

Key verification is OK*2 or immobiliser is unset (engine switch is on (ACC) or on (IG)).

-

(for Automatic Transmission)

The shift lever is in N and the steering is unlocked.

-

(for Automatic Transmission)

The brake pedal is on.

-

(for Manual Transmission)

The steering is unlocked.

-

(for Manual Transmission)

The clutch pedal is on.


·

Condition 2

All of the following conditions are met:

-

The power source mode was not turned from on (IG) to on (ACC).

-

Key verification is OK*2 or immobiliser is unset (engine switch is on (ACC) or on (IG)).

-

(for Automatic Transmission)

The brake pedal is on.

-

(for Automatic Transmission)

The shift lever is in P, or the shift lever is in N with the steering unlocked.

-

(for Manual Transmission)

The steering is unlocked.

-

(for Manual Transmission)

The clutch pedal is on.



*2: When the electrical key transmitter sub-assembly is in the cabin, the ID code sent as a result of communication between the electrical key transmitter sub-assembly and certification ECU (smart key ECU assembly) and the ID code calculated by the certification ECU (smart key ECU assembly) are compared. If the ID codes match each other, the vehicle recognizes that the electrical key transmitter sub-assembly is in the cabin.