DESCRIPTION
The certification ECU (smart key ECU assembly) and ECM control the vehicle immobiliser system functions. Immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3).
In some cases, a malfunction may be occurring in the immobiliser system even though the theft warning indicator light assembly (security indicator light) is not illuminated.
When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.
CHECK DLC3
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
INSPECT BATTERY VOLTAGE
Measure the battery voltage.
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery.
START FUNCTION PROBLEM SYMPTOMS
| Symptom | Suspected Area | Component Malfunction | Possible Output DTCs | Related Data List Item |
|---|---|---|---|---|
| Engine cannot be started*1 | Certification ECU (smart key ECU assembly) | Open or short circuit inside ECU | ·
B278A ·
B2799 ·
B279A |
·
# Codes ·
Immobilizer when IG=ON ·
Immobiliser ·
Master Key ·
Sub Key ·
BCC Malfunction ·
Abnormal Status ·
Different Encrypt Code ·
Different Serial Number ·
Frame Error ·
Response ·
Wireless Starter Com ID ·
Wireless C Code ·
Engine Start Condition ·
ID-BOX Sleep Condition ·
ID-BOX Start Condition ·
Engine Start Request ·
3bit Code Request ·
S Code Check ·
L Code Check ·
Unlock Request Receive ·
Lock Request Receive ·
S Code Check (Past) ·
L Code Check (Past) ·
EFI Code Receive ·
EFI Communication |
| Engine cannot be started*1 | ID code box (immobiliser code ECU) | Open or short circuit inside ECU | ·
B2790 ·
B2799 ·
B279A |
·
Immobilizer when IG=ON ·
Immobiliser ·
Master Key ·
Sub Key ·
BCC Malfunction ·
Abnormal Status ·
Different Encrypt Code ·
Different Serial Number ·
Frame Error ·
Response ·
ID-BOX Sleep Condition ·
ID-BOX Start Condition ·
Engine Start Request ·
3bit Code Request ·
S Code Check ·
L Code Check ·
S Code Check (Past) ·
L Code Check (Past) ·
EFI Code Receive ·
EFI Communication |
| ECM | Open or short circuit inside ECU | ·
B2799 ·
B279A ·
B279C |
EFI Code Receive | |
| SFI system*3
ECD system*4 |
ECM incompatible with installed immobiliser system | B279C | ·
Engine Start Condition ·
EFI Code Receive |
|
| Power source mode cannot be changed*1 | Engine switch | Open or short circuit inside switch | B278A | ·
Unlock Request Receive ·
Lock Request Receive |
| Certification ECU (smart key ECU assembly) | Open or short circuit inside ECU | ·
B2271 ·
B2274 |
·
Immobilizer when IG=ON ·
Immobiliser |
|
| Steering lock lock/unlock not possible*2 | Steering lock ECU (steering lock actuator or upper bracket assembly) | ·
Open or short circuit inside ECU ·
Actuator stuck |
·
B2781 ·
B2782 ·
B2788 |
·
Unlock Request Receive ·
Lock Request Receive |
*1: Refer to Problem Symptoms Table for Entry and Start System (for Start Function).
*2: Refer to Problem Symptoms Table for Steering Lock System.
Click hereSteering>STEERING COLUMN>STEERING LOCK SYSTEM>PROBLEM SYMPTOMS TABLE
*3: for Gasoline
*4: for Diesel