Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › from 2017.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260749 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

a.

w/o Dynamic Radar Cruise Control System:

i.

Measure the resistance according to the value(s) in the table below.

E144729C04
0.896,2.573 0.531,2.854 true 1.396,2.573 1.771,2.854 true 0.406,2.865 0.76,3.063 0.354,0.198 10 false CCS 1.656,2.865 1.969,3.063 0.313,0.198 10 false ECC 2.563,2.063 3.01,2.26 0.448,0.198 10 false (CCS) 2.552,2.74 3,2.938 0.448,0.198 10 false (ECC) 3.813,2.427 4.469,2.656 0.656,0.229 10 false ON-OFF 4.542,2.406 5.083,2.604 0.542,0.198 10 false +RES 5.26,2.406 5.74,2.604 0.479,0.198 10 false -SET 5.979,2.406 6.688,2.604 0.708,0.198 10 false CANCEL 0.333,1.844 0.646,2.042 0.313,0.198 10 false *a
*a Component without harness connected
(Cruise Control Main Switch)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
1 (ECC) - 3 (CCS) Neutral 10 kΩ or higher
+RES 236 to 244 Ω
-SET 618 to 642 Ω
CANCEL 1510 to 1570 Ω
ON-OFF Switch ON Below 1.5 Ω
ON-OFF Switch OFF 10 kΩ or higher


If the result is not as specified, replace the cruise control main switch.



b.

w/ Dynamic Radar Cruise Control System:

i.

Measure the resistance according to the value(s) in the table below.

E335153C04
0.833,2.625 0.542,2.969 true 1.365,2.635 1.573,2.979 true 0.333,1.865 0.646,2.063 0.313,0.198 10 false *a 0.396,3 0.75,3.219 0.354,0.219 10 false CCS 1.458,3.01 1.813,3.229 0.354,0.219 10 false ECC 2.615,2.792 3.031,3.01 0.417,0.219 10 false (CCS) 2.625,2.104 3.042,2.354 0.417,0.25 10 false (ECC) 3.802,2.438 4.469,2.688 0.667,0.25 10 false ON-OFF 4.563,2.438 5.094,2.688 0.531,0.25 10 false +RES 5.26,2.438 5.781,2.688 0.521,0.25 10 false -SET 5.969,2.417 6.729,2.698 0.76,0.281 10 false CANCEL
*a Component without harness connected
(Cruise Control Main Switch)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
1 (ECC) - 3 (CCS) Neutral 10 kΩ or higher
+RES 236 to 244 Ω
-SET 618 to 642 Ω
CANCEL 1510 to 1570 Ω
ON-OFF Switch ON Below 1.5 Ω
ON-OFF Switch OFF 10 kΩ or higher


If the result is not as specified, replace the cruise control main switch.