The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the navigation receiver assembly via this circuit.
Disconnect the H58 navigation receiver assembly connector.
Disconnect the H85 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H58-2 (US1-) - H85-9 (UDO-) | Always | Below 1 Ω |
| H58-3 (US1+) - H85-10 (UDO+) | Always | Below 1 Ω |
| H58-2 (US1-) - Body ground | Always | 10 kΩ or higher |
| H58-3 (US1+) - Body ground | Always | 10 kΩ or higher |
OK
NG