Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display) › from 2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261009 TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Multi-display) U

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/ Multi-display)  TERMINALS OF ECU  


CHECK CLEARANCE WARNING ECU


E220917E28
3.969,0.271 4.396,0.51 0.427,0.24 2.875,0.281 3.302,0.521 0.427,0.24 3.031,0.323 3.344,0.521 0.313,0.198 10 false I9 4.01,0.313 4.521,0.51 0.51,0.198 10 false G228 3.354,0.281 3.667,0.479 0.313,0.198 10 false *A 4.458,0.281 4.771,0.479 0.313,0.198 10 false *B

Text in Illustration
*A for 4 Sensor Type *B for 8 Sensor Type

a.

Measure the voltage and resistance and check for pulse signals according to the value(s) in the table below.

for 4 Sensor Type
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I9-22 (BOR) - I9-30 (E) P - W-B Power source for rear sensor circuit Ignition switch off Below 1.5 V
Ignition switch ON, back sonar or clearance sonar switch on 7.2 to 8.8 V
I9-14 (BBZ) - I9-13 (ER) GR - LG No. 1 clearance warning buzzer signal Buzzer not sounding Below 1 V
When sonar detects obstacle (Buzzer sounds) Pulse generation
(See waveform 1)
I9-9 (CLSW) - I9-30 (E) V - W-B Clearance sonar main switch signal Ignition switch ON, back sonar or clearance sonar switch on 11 to 14 V
Ignition switch ON, back sonar or clearance sonar switch off Below 1 V
I9-1 (IG) - I9-30 (E) L - W-B IG power source signal Ignition switch off Below 1.5 V
Ignition switch ON 11 to 14 V
I9-30 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
I9-23 (E1) - I9-30 (E) R - W-B Ground for rear sensors Always Below 1 Ω
I9-24 (SOR) - I9-30 (E) W - W-B Rear sensor communication signal Ignition switch ON, back sonar or clearance sonar switch on, shift lever in R Pulse generation
(See waveform 2)

for 8 Sensor Type
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G228-22 (BOR) - G228-30 (E) P - W-B Power source for rear sensor circuit Ignition switch off Below 1.5 V
Ignition switch ON, back sonar or clearance sonar switch on 7.2 to 8.8 V
G228-8 (SOF) - G228-30 (E) R - W-B Front sensor communication signal Ignition switch ON, back sonar or clearance sonar switch on, shift lever in R Pulse generation
(See waveform 2)
G228-14 (CBZ) - G228-30 (E) GR - W-B Clearance warning buzzer signal Ignition switch off Below 1.5 V
Ignition switch ON, back sonar or clearance sonar switch on 11 to 14 V
G228-13 (EF) - G228-30 (E) LG - W-B Ground for clearance warning buzzer When sonar detects obstacle (Buzzer sounds) Pulse generation
(See waveform 1)
G228-9 (CLSW) - G228-30 (E) V - W-B Clearance sonar main switch signal Ignition switch ON, back sonar or clearance sonar switch on 11 to 14 V
Ignition switch ON, back sonar or clearance sonar switch off Below 1 V
G228-1 (IG) - G228-30 (E) L - W-B IG power source signal Ignition switch off Below 1.5 V
Ignition switch ON 11 to 14 V
G228-30 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
G228-23 (E1) - G228-30 (E) R - W-B Ground for rear sensors Always Below 1 Ω
G228-6 (E5) - G228-30 (E) G - W-B Ground for front sensors Always Below 1 Ω
G228-4 (BOF) - G228-30 (E) V - W-B Power source for front sensor circuit Ignition switch off Below 1.5 V
Ignition switch ON, back sonar or clearance sonar switch on 7.2 to 8.8 V
G228-24 (SOR) - G228-30 (E) W - W-B Rear sensor communication signal Ignition switch ON, back sonar or clearance sonar switch on, shift lever in R Pulse generation
(See waveform 2)


b.
E227014E07
0.104,1.688 0.563,1.885 0.458,0.198 10 false GND

Using an oscilloscope, check waveform 1.

Measurement Condition
Item Content
Terminal No. (Symbol)
·

I9-14 (BBZ) - I9-13 (ER)*1

·

G228-13 (EF) -G228-30 (E)*2


Tool Setting 2 V/DIV., 500 μsec./DIV.
Condition When sonar detects obstacle (Buzzer sounds)

*1: for 4 Sensor Type

*2: for 8 Sensor Type



c.
E168463E01
0.132,1.495 0.473,1.669 0.342,0.174 10 GND 0.132,0.871 0.469,1.046 0.337,0.174 10 GND 0.049,0.571 0.423,0.727 0.373,0.156 10 CH: 1 0.049,1.246 0.423,1.402 0.373,0.156 10 CH: 2

Using an oscilloscope, check waveform 2.

Measurement Condition
Item Content
Terminal No. (Symbol)
·

CH1: G228-8 (SOF) - G228-30 (E)*2

·

CH2: I9-24 (SOR) - I9-30 (E)*1

·

CH2: G228-24 (SOR) - G228-30 (E)*2


Tool Setting 5 V/DIV., 1 msec./DIV.
Condition Ignition switch ON, back sonar or clearance sonar switch on, shift lever in R

*1: for 4 Sensor Type

*2: for 8 Sensor Type