Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2017.08–2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260748 DYNAMIC RADAR CRUISE CONTROL SYSTEM U

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK ECM (for 1GR-FE)


E191646E26
0.646,0.917 1.063,1.167 0.417,0.25 1.646,0.917 2.063,1.167 0.417,0.25 3.167,0.906 3.583,1.167 0.417,0.26 4.063,0.917 4.479,1.177 0.417,0.26 4.927,0.906 5.344,1.167 0.417,0.26 6.031,0.917 6.448,1.177 0.417,0.26 0.729,0.958 1.073,1.135 0.344,0.177 10 false G55 1.74,0.958 2.083,1.135 0.344,0.177 10 false G56 6.125,0.969 6.469,1.146 0.344,0.177 10 false C37 5.021,0.969 5.365,1.146 0.344,0.177 10 false C36 3.26,0.969 3.604,1.146 0.344,0.177 10 false C34 4.156,0.969 4.5,1.146 0.344,0.177 10 false C35

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C36-12 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
C34-22 (D) - C36-12 (E1) B - BR D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
G55-24 (BATT) - C36-12 (E1) L - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G56-9 (SFTD) - C36-12 (E1) LG - BR Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
G56-15 (SFTU) - C36-12 (E1) GR - BR Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
G56-22 (S) - C36-12 (E1) V - BR S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G56-1 (CCS) - C36-12 (E1) B - BR Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G56-34 (ST1-) - C36-12 (E1) B - BR Stop light switch assembly signal (opposite of voltage at STP terminal) Ignition switch ON,
brake pedal depressed
Below 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G56-35 (STP) - C36-12 (E1) V - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V


CHECK ECM (for 2TR-FE)


A352214E19
0.74,0.469 1.188,0.781 0.448,0.313 1.969,0.479 2.385,0.771 0.417,0.292 3.375,0.469 3.802,0.76 0.427,0.292 4.771,0.51 5.208,0.781 0.438,0.271 6.083,0.521 6.49,0.792 0.406,0.271 0.813,0.542 1.271,0.74 0.458,0.198 10 false C153 2.021,0.542 2.479,0.74 0.458,0.198 10 false C154 3.427,0.542 3.885,0.74 0.458,0.198 10 false C155 4.833,0.563 5.292,0.76 0.458,0.198 10 false G181 6.125,0.573 6.583,0.771 0.458,0.198 10 false G180

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C153-3 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
C155-17 (SFTU) - C153-3 (E1) GR- BR Down-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)
C155-27 (SFTD) - C153-3 (E1) LG - BR Up-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)
C155-30 (S) - C153-3 (E1) V - BR S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G181-18 (D) - C153-3 (E1) B - BR D shift position signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
G181-22 (CCS) - G181-21 (ECCS) B - BR Cruise control main switch circuit Cruise control switch off 1 MΩ or higher
Cruise control switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G180-3 (BATT) - C153-3 (E1) L - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G180-10 (STP) - C153-3 (E1) V - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G180-11 (ST1-) - C153-3 (E1) B - BR Stop light switch assembly signal (opposite to voltage at STP terminal) Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V


CHECK ECM (for 1GD-FTV)


A340466E51
0.583,0.5 1,0.75 0.417,0.25 1.75,0.5 2.167,0.75 0.417,0.25 2.854,0.5 3.281,0.76 0.427,0.26 3.917,0.5 4.333,0.75 0.417,0.25 5,0.5 5.448,0.75 0.448,0.25 6.104,0.5 6.542,0.75 0.438,0.25 0.625,0.552 0.979,0.76 0.354,0.208 10 false C149 1.792,0.542 2.146,0.75 0.354,0.208 10 false C150 2.896,0.552 3.25,0.76 0.354,0.208 10 false C151 3.958,0.552 4.313,0.76 0.354,0.208 10 false C152 5.042,0.552 5.396,0.76 0.354,0.208 10 false G184 6.146,0.552 6.5,0.76 0.354,0.208 10 false G185

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C149-14 (D) - C152-1 (E1) B - W-B D shift position signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
C152-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G184-13 (S) - C152-1 (E1) V - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G184-20 (SFTD) - C152-1 (E1) LG - W-B Down-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
G184-21 (SFTU) - C152-1 (E1) GR - W-B Up-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
G185-1 (BATT) - C152-1 (E1) L - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G185-12 (ST1-) - C152-1 (E1) B - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
0 to 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G185-13 (STP) - C152-1 (E1) V - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G185-26 (CCS) - C152-1 (E1) B - W-B Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω


CHECK ECM (for 1KD-FTV)


C387812E01
0.635,1.042 1.063,1.26 0.427,0.219 1.615,1.042 2.042,1.26 0.427,0.219 3.167,1.073 3.594,1.292 0.427,0.219 4.021,1.073 4.448,1.292 0.427,0.219 4.927,1.083 5.354,1.302 0.427,0.219 6.021,1.083 6.448,1.302 0.427,0.219 0.729,1.073 1.188,1.271 0.458,0.198 10 false G57 1.688,1.073 2.146,1.271 0.458,0.198 10 false G58 3.281,1.104 3.74,1.302 0.458,0.198 10 false C90 4.125,1.104 4.583,1.302 0.458,0.198 10 false C91 5.021,1.104 5.479,1.302 0.458,0.198 10 false C92 6.115,1.104 6.573,1.302 0.458,0.198 10 false C93

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C93-1 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
G57-23 (BATT) - C93-1 (E1) L - BR Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G57-9 (ST1-) - C93-1 (E1) B - BR Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
0 to 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G57-8 (STP) - C93-1 (E1) V - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G57-14 (CCS) - C93-1 (E1) B - BR Cruise control switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω


CHECK TCM (for 1KD-FTV)


C214981E17
1.479,0.208 1.854,0.427 0.375,0.219 3.49,0.208 3.865,0.427 0.375,0.219 5.458,0.208 5.833,0.427 0.375,0.219 1.542,0.25 1.854,0.427 0.313,0.177 10 false G69 3.552,0.25 3.865,0.427 0.313,0.177 10 false G71 5.51,0.25 5.823,0.427 0.313,0.177 10 false G70

HINT:

Each TCM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G71-8 (D) - G69-1 (E1) B - BR D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G69-1 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
G70-15 (S) - G69-1 (E1) V - BR S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G70-22 (SFTU) - G69-1 (E1) GR - BR Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
G70-23 (SFTD) - G69-1 (E1) LG - BR Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V


CHECK DRIVING SUPPORT ECU ASSEMBLY


E321781E59
3.271,0.115 3.688,0.365 0.417,0.25 3.313,0.167 3.75,0.385 0.438,0.219 10 false G224

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G224-3 (BZ) - G224-28 (GND) SB - W-B Skid control buzzer output Ignition switch ON, buzzer not sounding 11 to 14 V
G224-7 (B) - G224-28 (GND) G - W-B Power source Ignition switch ON 10.5 to 16 V
G224-8 (CA1P) - G224-28 (GND) GR - W-B CAN communication signal Ignition switch ON Pulse generation
(See waveform 1)
G224-9 (CA1N) - G224-28 (GND) W - W-B CAN communication signal Ignition switch ON Pulse generation
(See waveform 2)
G224-10 (CA2H) - G224-28 (GND) G - W-B CAN communication signal Ignition switch ON Pulse generation
(See waveform 1)
G224-11 (CA2L) - G224-28 (GND) W - W-B CAN communication signal Ignition switch ON Pulse generation
(See waveform 2)
G224-23 (SPSW) - G224-28 (GND) V - W-B Steering pad switch signal (Vehicle-to-vehicle distance control switch signal) Ignition switch ON, vehicle-to-vehicle distance control switch on Below 1 Ω
Ignition switch ON, vehicle-to-vehicle distance control switch off 4.75 to 5.25 V
G224-28 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

a.
A292386E15
1.344,1.917 2.313,2.146 0.969,0.229 10 false 10 μsec./DIV. 2.76,0.219 3.333,0.427 0.573,0.208 10 false 1 V/DIV. 3,1.406 3.365,1.583 0.365,0.177 10 false GND

Waveform 1

i.

CAN communication signal

Item Content
Terminal Name Between G224-8 (CA1P) and G224-28 (GND)
Between G224-10 (CA2H) and G224-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




b.
A292387E18
3,1.375 3.344,1.573 0.344,0.198 10 false GND 2.781,0.26 3.417,0.458 0.635,0.198 10 false 1 V/DIV. 1.375,1.885 2.323,2.135 0.948,0.25 10 false 10 μsec./DIV.

Waveform 2

i.

CAN communication signal

Item Content
Terminal Name Between G224-9 (CA1N) and G224-28 (GND)
Between G224-11 (CA2L) and G224-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.





CHECK MILLIMETER WAVE RADAR SENSOR


E321782E45
2.229,0.719 2.646,0.958 0.417,0.24 2.281,0.76 2.74,0.958 0.458,0.198 10 false A100

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A100-1 (SGND) - Body ground BR - Body ground Ground Always Below 1 Ω
A100-2 (CA2L) - A100-1 (SGND) W - BR CAN communication signal Ignition switch ON Pulse generation
(See waveform 2)
A100-3 (CA2H) - A100-1 (SGND) V - BR CAN communication signal Ignition switch ON Pulse generation
(See waveform 1)
A100-5 (CA1P) - A100-1 (SGND) L - BR CAN communication signal Ignition switch ON Pulse generation
(See waveform 1)
A100-6 (CA1N) - A100-1 (SGND) W - BR CAN communication signal Ignition switch ON Pulse generation
(See waveform 2)
A100-8 (IGB) - A100-1 (SGND) GR-G - BR Power source Ignition switch ON 10.5 to 16 V

a.
A292386E16
1.344,1.917 2.313,2.146 0.969,0.229 10 false 10 μsec./DIV. 2.76,0.219 3.333,0.427 0.573,0.208 10 false 1 V/DIV. 3,1.406 3.365,1.583 0.365,0.177 10 false GND

Waveform 1

i.

CAN communication signal

Item Content
Terminal Name Between A100-3 (CA2H) and A100-1 (SGND)
Between A100-5 (CA1P) and A100-1 (SGND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




b.
A292387E19
3,1.375 3.344,1.573 0.344,0.198 10 false GND 2.781,0.26 3.417,0.458 0.635,0.198 10 false 1 V/DIV. 1.375,1.885 2.323,2.135 0.948,0.25 10 false 10 μsec./DIV.

Waveform 2

i.

CAN communication signal

Item Content
Terminal Name Between A100-2 (CA2L) and A100-1 (SGND)
Between A100-6 (CA1N) and A100-1 (SGND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.