FRONT WIPER SYSTEM
The following measures are taken as a fail-safe when any malfunction is detected by the windshield wiper switch.
| Trouble Area | Fail-safe Control |
|---|---|
| Wiper Motor | The operation of the rain sensing function stops. |
| Communication Signal | Rain sensing function:
·
The wiper operation continues at the speed that it was operating at prior to the malfunction. ·
Switches to the intermittent operation if a malfunction of the rain sensor is detected when the ignition switch is turned from off to ON or the wiper switch is in AUTO position. |
| Wiper switch operation:
The wiper operation continues at the speed that it was operating at prior to the malfunction. |
AUTO WIPER SYSTEM
The rain sensor operates in fail-safe mode if an abnormal condition such sa those listed below has been detected.
| Item | Outline |
|---|---|
| Detection of abnormal high temperature | The operation of the rain sensing function stop. |
| Detection of abnormal input voltage (low input voltage) | |
| Detection of abnormal low temperature | |
| Detection of abnormal output signal | Switches to intermittent operation. |
| Detection of abnormal communication |