| Fuel pressure | Standard fuel pressure | at idle | 300 to 389 kPa (3.1 to 4.0 kgf/cm2, 44 to 56 psi) | ||
| remains for 5 minutes after engine has stopped | 147 kPa (1.5 kgf/cm2, 21 psi) or higher | ||||
| Fuel injector | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 11.6 to 12.4 Ω | |||
| Standard injection volume | 82 to 99 cm3 (5.0 to 6.0 cu. in.) per 15 seconds | ||||
| Difference between each cylinder | 17 cm3 (1.0 cu. in.) or less | ||||
| Standard fuel leakage | 1 drop or less in 25 minutes | ||||
| Fuel pump (for 5 Door) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω | |||
| Fuel pump (for 3 Door) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω | |||
| Fuel sender gauge assembly (for Single Tank Type) | for 5 Door | Standard resistance | Tester Connection | Condition | Specified Condition |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.255 to 4.605 V* | |||
| Float position is E (lower) | 0.345 to 0.695 V* | ||||
| for 3 Door | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.255 to 4.605 V* | |||
| Float position is E (lower) | 0.345 to 0.695 V* | ||||
| Fuel sender gauge assembly (for Double Tank Type) | for Fuel Main Tank | Standard resistance | Tester Connection | Condition | Specified Condition |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.255 to 4.605 V* | |||
| Float position is E (lower) | 0.345 to 0.695 V* | ||||
| for Fuel Sub Tank | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 2 (FE) - 3 (FR) | Float position is F (upper) | 4.255 to 4.605 V* | |||
| Float position is E (lower) | 0.345 to 0.695 V* | ||||
*: The output voltage changes depending on the voltage applied to the terminals.