84871
1.INSPECT FRONT WIPER DEICER SWITCH
| *a | Component without harness connected
(Front Wiper Deicer Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (E) - 5 (IG) | Front wiper deicer switch on | Below 1 Ω |
| Front wiper deicer switch off | 10 kΩ or higher |
If the result is not as specified, replace the front wiper deicer switch.
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 5 (IG)
Battery negative (-) → 4 (D) |
Indicator LED illuminates |
| Battery positive (+) → 6 (ILL+)
Battery negative (-) → 1 (ILL-) |
Illumination LED illuminates |
If the result is not as specified, replace the front wiper deicer switch.