Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM › from 2017.08
RM27T0E _55 Steering _053718 STEERING COLUMN _0260955 POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM D

STEERING COLUMN  POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


NOTICE:
·

Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.

·

Turn the ignition switch to ON and park the vehicle on level ground. Check the freeze frame data by using the GTS.



a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Check the freeze frame data.


f.

Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.

Tilt & Telescopic
Tester Display
Tilt Position
Telesco Position
Tilt Return Position
Telesco Return Position
Tilt Up Switch
Tilt Up SW(CAN)
Tilt Down Switch
Tilt Down SW(CAN)
Telesco Short Switch
Telesco Short SW(CAN)
Telesco Long Switch
Telesco Long SW(CAN)
T&T Manual SW Data
Power Source Voltage
Freeze Speed Info
IG Switch (CAN)
IG Switch
Receive from Meter
Receive from Seat ECU
Receive from Combi
J/B
Handle Position
The Number of DTCs