This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AB6 | The blind spot monitor sensor LH (master) detects an internal malfunction. | Blind spot monitor sensor LH |
When checking for DTCs, make sure that the blind spot monitor system is on.
Clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SYSTEM>DTC CHECK / CLEAR).
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG