Use these procedures to troubleshoot the airbag system.
*: Use the intelligent tester.
| Proceed to |
|---|
| NEXT |
NEXT
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| Proceed to |
|---|
| NEXT |
NEXT
Check if a CAN communication system DTC is output.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (w/ Central Gateway ECU) | B |
| DTC is output (w/o Central Gateway ECU) | C |
A
B
C
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
(See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR)
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output | B |
A
B
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
(See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR)
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
B
(See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSTIC TROUBLE CODE CHART)
| Proceed to |
|---|
| NEXT |
NEXT