These DTCs are stored when the clearance warning ECU cannot receive and recognize certain signals via the CAN communication system.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | A problem with the engine information signal from the ECM | CAN communication system |
| U0101 | A problem with the shift position information signal from the power management control ECU | CAN communication system |
| U0142 | A problem with the vehicle information signal from the main body ECU (multiplex network body ECU) | CAN communication system |
| U0155 | A problem with the vehicle speed information signal from the combination meter assembly | CAN communication system |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC (CAN communication system DTC) is output | A |
| No DTC is output | B |
A
B
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)