Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75444E
1.REMOVE FRONT FENDER PLATE LH
When removing the front fender plate LH, heat the front fender plate LH and vehicle body using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Fender Plate LH | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or front fender plate LH excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
Put protective tape around the front fender plate LH.
Insert piano wire between the vehicle body and front fender plate LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the front fender plate LH to the vehicle body.
Be careful not to damage the vehicle body.
Remove the front fender plate LH.