Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2018.06
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260468 INTAKE AIR TEMPERATURE SENSOR G

1GD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89424D 1.INSPECT INTAKE AIR TEMPERATURE SENSOR

a.

w/o Urea SCR System:

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.65 kΩ
60°C (140°F) 0.54 to 0.62 kΩ


If the result is not as specified, replace the intake air temperature sensor.



b.

w/ Urea SCR System:

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25 °C (77 °F) 15.94 to 18.53 kΩ
50 °C (122 °F) 9.01 to 10.25 kΩ


If the result is not as specified, replace the intake air temperature sensor.