Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH (w/o Tire Carrier) › 2018.06–2019.08
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261311 BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier) A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH(w/o Tire Carrier)  REASSEMBLY  


PROCEDURE

Hide 76825 1.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

HINT:

When installing the back door outside garnish protector, heat the No. 2 back door outside garnish surface using a heat light.


Standard:
Item Temperature
No. 2 Back Door Outside Garnish 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the No. 2 back door outside garnish surface.

i.

Using a heat light, heat the No. 2 back door outside garnish surface


ii.

Remove the double-sided tape from the No. 2 back door outside garnish.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B488303C02
1.719,1 1.719,0.583 1.719,0.583 2.219,0.583 false 2.281,0.5 2.594,0.656 0.313,0.156 10 false *1
*1 Back Door Outside Garnish Protector


Install a new back door outside garnish protector.

i.

Using a heat light, heat the No. 2 back door outside garnish.


ii.

Remove the peeling paper from the face of the back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.




Hide 76825B 2.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (w/ BACK DOOR OUTSIDE GARNISH PROTECTOR, for Center)

HINT:
·

When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

·

Use the same procedure for the other side.



Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B552813C01
2.156,0.948 2.156,0.5 true 2.083,0.323 2.396,0.521 0.313,0.198 10 false *1
*1 Back Door Outside Garnish Protector


Install a new back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish sub-assembly.


ii.

Remove the peeling paper from the face of the back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.




Hide 76825C 3.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

HINT:

When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the back door outside garnish sub-assembly surface


ii.

Remove the double-sided tape from the back door outside garnish sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B488302C02
1.042,1.594 1.042,1.844 1.042,1.844 1.458,1.844 false 2.406,1.594 2.406,1.844 2.406,1.844 2.823,1.844 false 1.51,1.75 1.823,1.906 0.313,0.156 10 false *1 2.885,1.76 3.198,1.917 0.313,0.156 10 false *1
*1 Back Door Outside Garnish Protector


Install a new back door outside garnish protector.

i.

Using a heat light, heat the back door outside garnish sub-assembly.


ii.

Remove the peeling paper from the face of the back door outside garnish protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door outside garnish protector as shown in the illustration.

HINT:

Press the back door outside garnish protector firmly to install it.




Hide 84945 4.INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)

Hide 76826A 5.INSTALL NO. 1 BACK DOOR GARNISH RETAINER

a.

Attach the 2 guides to install the No. 1 back door garnish retainer.


b.

Install the 2 screws.


Hide 81275A 7.INSTALL LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

a.

Connect the connector to install the license plate light cord.