81275A
1.REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)
Disconnect the connector and remove the license plate light cord.
2.REMOVE LICENSE PLATE LIGHT ASSEMBLY
76826A
3.REMOVE NO. 1 BACK DOOR GARNISH RETAINER
Remove the 2 screws.
Detach the 2 guides and remove the No. 1 back door garnish retainer.
84945
4.REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)
76825C
5.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)
| *1 | Back Door Outside Garnish Protector |
Remove the back door outside garnish protector.
76825B
6.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Center)
| *1 | Back Door Outside Garnish Protector |
Remove the back door outside garnish protector.
Use the same procedure for the other side.
76825
7.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)
| *1 | Back Door Outside Garnish Protector |
Remove the back door outside garnish protector.