AUTOMATIC LEARNING PERFORMED WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL
When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
| Effect/Inoperative Function When Necessary Procedures are not Performed
|
Necessary Procedures
|
Link
|
| Lane departure alert system
|
Drive the vehicle straight ahead at 40 km/h (25 mph) or more for 10 seconds or more.
|
( )
|
| Pre-collision system
|
| Lighting system (EXT) (for LED Headlight)
|
| Stop and start system
|
Drive the vehicle until stop and start control is permitted (approximately 5 to 60 minutes)
|
( )
|
| Vehicle stability control system (for Hydraulic brake booster)
|
Drive the vehicle straight ahead at 40 km/h (25 mph) or more for at least 10 seconds.
|
( )
|