Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat) › from 2020.08
RM27T0E _58 Vehicle Interior _053737 SEAT _0261114 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:

If the side airbag was deployed, replace the front seat side airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 71910A 3.REMOVE FRONT SEAT HEADREST ASSEMBLY

a.

Remove the front seat headrest.


Hide 72128A 4.REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH

a.

Operate the seat track adjusting handle to move the seat to the rearmost position.


b.
B238095

Using a moulding remover, detach the 2 claws.


c.

Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.


Hide 72124 5.REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH

a.
B238097

Using a moulding remover, detach the 2 claws.


b.

Move the cover in the direction of the arrow to detach the 2 claws and guide, and remove the cover.


Hide 72158 6.REMOVE INNER SEAT TRACK BRACKET COVER LH

a.

Operate the seat track adjusting handle to move the seat to the foremost position.


b.
B238099

Using a moulding remover, detach the 2 claws.


c.

Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.


Hide 72138B 7.REMOVE SEAT TRACK COVER LH

a.
B238101

Using a moulding remover, detach the 2 claws.


b.

Move the cover in the direction of the arrow to detach the 4 guides and remove the cover.


Hide 8.REMOVE FRONT SEAT ASSEMBLY

a.
B238103

Remove the 2 bolts.


b.

Operate the seat track adjusting handle to move the seat to the rearmost position.


c.
B238104

Remove the 2 bolts.


d.

Operate the seat track adjusting handle to move the seat to the center position, and operate the reclining adjusting handle and move the seatback to the upright position.


e.

Disconnect the connectors under the seat.


f.

Remove the front seat assembly.

NOTICE:

Be careful not to damage the vehicle body.