Home › Drivetrain › VF4BM (TRANSFER / 4WD / AWD) › TRANSFER ASSEMBLY › from 2020.08
RM27T0E _52 Drivetrain _053703 VF4BM TRANSFER / 4WD / AWD _0260842 TRANSFER ASSEMBLY A

VF4BM TRANSFER / 4WD / AWD  TRANSFER ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE HOSE

a.

Detach the clamp and remove the hose.


Hide 36102D 2.REMOVE TRANSFER BEARING RETAINER SUB-ASSEMBLY RH

a.

Remove the 5 bolts and transfer bearing retainer sub-assembly RH.

HINT:

If necessary, tap the transfer bearing retainer sub-assembly RH with a plastic-faced hammer to remove it.



b.

for RA61F:

Remove the O-ring from the transfer bearing retainer sub-assembly RH.


Hide 36102F 3.REMOVE TRANSFER BEARING RETAINER OIL SEAL RH

a.

for AC60F, G52F, R150F:

Using a screwdriver and hammer, remove the transfer bearing retainer oil seal RH from the transfer bearing retainer sub-assembly RH.


b.

for RA61F:

Using a screwdriver and hammer, remove the 2 transfer bearing retainer oil seals RH from the transfer bearing retainer sub-assembly RH.


Hide 36102 4.REMOVE TRANSFER CASE COVER SUB-ASSEMBLY

a.

Remove the 4 bolts and transfer case cover sub-assembly.


Hide 36108A 5.REMOVE BREATHER OIL DEFLECTOR

a.

Remove the breather oil deflector.


Hide 33309C 6.REMOVE FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

a.

Using a chisel and hammer, loosen the staked part of the lock nut.


b.
U170771E01
1.396,0.802 1.396,0.281 1.396,0.281 2.49,0.281 true 2.552,0.167 2.854,0.375 0.302,0.208 10 false SST 1.052,1.542 1.24,1.75 0.188,0.208 10 false *a 0.958,0.615 1.146,0.823 0.188,0.208 10 true *b

Using SST to hold the front output shaft companion flange sub-assembly, remove the lock nut.

SST
09330-00021  

Text in Illustration
*a Turn
*b Hold


c.
C216517E01
0.563,2.06 0.909,2.252 0.346,0.192 10 SST 1.397,1.773 1.149,2.153 false 1.149,2.153 0.944,2.153 false

Using SST, remove the companion flange.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)


Hide 33309D 7.REMOVE FRONT TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL

a.

Using a screwdriver and hammer, tap out the oil seal from the companion flange.

NOTICE:

Be careful not to damage the oil seal and companion flange contact surfaces.



Hide 33309C 9.REMOVE REAR OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

a.

Using a chisel and hammer, loosen the staked part of the lock nut.


b.
C216522E01
2.533,1.43 2.932,1.635 0.399,0.205 10 SST 1.824,0.598 2.208,1.514 false 2.208,1.514 2.477,1.514 false

Using SST to hold the companion flange, remove the lock nut.

SST
09330-00021  


c.
C217503E01
0.796,2.257 1.280,2.468 0.485,0.211 10 SST 1.357,1.771 0.967,1.984 false 0.967,1.984 0.967,2.248 false

Using SST, remove the companion flange.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)


Hide 33309D 10.REMOVE REAR TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL

a.

Using a screwdriver and hammer, tap out the oil seal from the companion flange.

NOTICE:

Be careful not to damage the oil seal and companion flange contact surfaces.



Hide 36105 12.REMOVE TRANSFER EXTENSION HOUSING SUB-ASSEMBLY

a.

Remove the 5 bolts and extension housing.

HINT:

If necessary, tap the extension housing with a plastic-faced hammer to remove it.



Hide 33309H 13.REMOVE TRANSFER OUTPUT SHAFT WASHER

a.

Remove the 2 washers.


Hide 14.REMOVE COLLAR

a.

Remove the collar.


Hide 36112 15.REMOVE REAR TRANSFER CASE

a.

Remove the 12 bolts and clamp.


b.

Remove the rear transfer case.

HINT:

If necessary, tap the rear transfer case with a plastic-faced hammer to remove it.



Hide 16.REMOVE NO. 2 TRANSFER GEAR SHIFT FORK SUB-ASSEMBLY WITH TRANSFER HIGH AND LOW CLUTCH SLEEVE

a.
F043434

Remove the bolt, No. 2 gear shift fork, and high and low clutch sleeve.


Hide 41408 17.REMOVE CENTER DIFFERENTIAL LOCK FORK SUB-ASSEMBLY WITH FRONT DRIVE CLUTCH SLEEVE

a.
F043502

Using 2 screwdrivers and a hammer, tap off the snap ring.


b.
F043503

Remove the bolt, center differential lock fork and front drive clutch sleeve.


Hide 18.REMOVE REAR OUTPUT SHAFT SUB-ASSEMBLY, FRONT DRIVE CHAIN AND DRIVEN SPROCKET SUB-ASSEMBLY

a.

Mount the rear transfer case in a vise.


b.

Using a snap ring expander, remove the snap ring.


c.

Using a plastic-faced hammer, carefully tap the rear transfer case, and remove the rear output shaft together with the front drive chain and driven sprocket.


d.

Remove the rear output shaft, front drive chain and driven sprocket.


Hide 36292A 19.REMOVE TRANSFER DRIVEN SPROCKET BEARING

a.
C216518E01
2.714,1.323 3.072,1.496 0.359,0.173 10 SST 2.313,2.056 2.46,1.406 false 2.46,1.406 2.67,1.406 false

Using SST and a press, remove the driven sprocket bearing.

SST
09555-55010  

NOTICE:

Be careful not to drop or damage the driven sprocket.



Hide 36212A 20.REMOVE TRANSFER INPUT GEAR RADIAL BALL BEARING

a.
C216519E01
2.785,1.381 3.159,1.591 0.374,0.210 10 SST 2.365,2.063 2.524,1.466 false 2.524,1.466 2.743,1.466 false

Using SST and a press, remove the transfer input gear radial ball bearing.

SST
09555-55010  

NOTICE:

Be careful not to drop or damage the driven sprocket.



Hide 36410J 21.REMOVE TRANSFER SHIFT ACTUATOR ASSEMBLY

a.
F043506

Using 2 screwdrivers and a hammer, tap off the 2 snap rings.


b.

Remove the 3 bolts and transfer shift actuator assembly.


c.
C314513

Remove the O-ring from the transfer shift actuator assembly.


Hide 36114B 22.REMOVE FILLER PLUG

a.

Remove the filler plug and gasket.


Hide 36114B 23.REMOVE DRAIN PLUG

a.

Remove the drain plug and gasket.


Hide 36104H 24.REMOVE TRANSFER OIL SEPARATOR SUB-ASSEMBLY

a.

Remove the 3 bolts and oil separator.


Hide 33449D 25.REMOVE TRANSFER CASE MAGNET

Hide 36106 26.REMOVE TRANSFER OIL PUMP BODY SUB-ASSEMBLY

a.

Remove the 3 bolts and oil pump body.


Hide 36104J 27.REMOVE TRANSFER OIL PUMP BODY O-RING

F043462

a.

Using a screwdriver, remove the oil pump body O-ring.

NOTICE:

Be careful not to damage the oil pump body.



Hide 36227 28.REMOVE TRANSFER OIL PUMP GEAR

a.

Remove the transfer oil pump gear.


Hide 29.REMOVE LOW PLANETARY GEAR ASSEMBLY WITH TRANSFER INPUT SHAFT SUB-ASSEMBLY

a.
F043449

Using a snap ring expander, remove the snap ring.


b.

Remove the low planetary gear together with the input shaft.


Hide 36231A 30.REMOVE TRANSFER OUTPUT SHAFT SPACER

a.

Remove the transfer output shaft spacer.


Hide 36231E 31.REMOVE TRANSFER OUTPUT SHAFT FRONT NEEDLE ROLLER BEARING

a.

Remove the needle roller bearing.


Hide 36213B 32.REMOVE TRANSFER INPUT GEAR STOPPER SHAFT SNAP RING

a.
F043452

Using a snap ring expander, remove the snap ring.


Hide 36213 33.REMOVE TRANSFER INPUT GEAR STOPPER

a.

Remove the input gear stopper.


Hide 36213A 34.REMOVE TRANSFER INPUT GEAR STOPPER BALL

a.

Remove the ball.


Hide 33309H 35.REMOVE MANUAL TRANSFER PLANETARY CARRIER WASHER

a.

Remove the washer.


Hide 36211 36.REMOVE TRANSFER INPUT SHAFT

a.

Remove the transfer input shaft.


Hide 36288 37.REMOVE NO. 1 TRANSFER THRUST BEARING RACE

a.

Remove the thrust bearing race.


Hide 36270A 38.REMOVE TRANSFER LOW PLANETARY GEAR THRUST BEARING

a.

Remove the bearing.


Hide 36216A 39.REMOVE NO. 1 TRANSFER INPUT SHAFT SEAL RING

a.
C357241

Remove the 2 seal rings.


Hide 36210A 40.REMOVE TRANSFER INPUT SHAFT BEARING

a.

Using a snap ring expander, remove the snap ring.


b.
C216520E07
2.708,2.094 2.948,2.094 false 2.271,2.063 2.729,1.354 false 2.729,1.354 2.219,1.698 false 3,2.021 3.333,2.229 0.333,0.208 10 false SST 2.771,1.26 3.104,1.469 0.333,0.208 10 false SST

Using SST and a press, remove the input shaft bearing.

SST
09555-55010  
09950-70010  (09951-07150)
09950-60020  (09951-00750)

NOTICE:

Be careful not to drop or damage the low planetary gear.



Hide 36284 41.REMOVE TRANSFER LOW PLANETARY GEAR SPLINE PIECE

a.
F043507

Using a screwdriver, remove the snap ring.


b.

Remove the low planetary gear spline piece.


Hide 36270A 42.REMOVE TRANSFER LOW PLANETARY GEAR BEARING

a.
F043526E09
2.073,1.323 2.438,1.625 2.438,1.625 2.563,1.625 false 2.604,1.5 2.906,1.708 0.302,0.208 10 false SST

Using SST, remove the low planetary gear bearing.

SST
09612-65014  (09612-01030, 09612-01050)

NOTICE:

Make sure SST fits securely in the space between the bearing and low planetary gear.



Hide 36256 43.REMOVE NO. 2 TRANSFER OUTPUT SHAFT SPACER

a.

Using a snap ring expander, remove the snap ring.


b.

Remove the spacer.


Hide 36255A 44.REMOVE TRANSFER OUTPUT SHAFT SPACER BALL

a.

Remove the ball.


Hide 41311M 45.REMOVE CENTER DIFFERENTIAL CASE

a.

Remove the center differential case.


Hide 36237 46.REMOVE TRANSFER CLUTCH HUB

a.

Remove the transfer clutch hub.


Hide 36231E 47.REMOVE TRANSFER OUTPUT SHAFT FRONT NEEDLE ROLLER BEARING

a.

Remove the needle roller bearing.


Hide 36231D 48.REMOVE TRANSFER OUTPUT SHAFT PLATE WASHER

a.

Remove the washer.


Hide 36231J 49.REMOVE REAR TRANSFER OUTPUT SHAFT RADIAL BALL BEARING

a.
C216376E01
2.735,1.257 3.147,1.488 0.413,0.231 10 SST 2.336,1.941 2.508,1.327 false 2.508,1.327 2.708,1.327 false

Using SST and a press, remove the bearing.

SST
09555-55010  


Hide 36255 50.REMOVE NO. 1 TRANSFER OUTPUT SHAFT SPACER

a.

Remove the output shaft spacer.


Hide 36205 51.REMOVE TRANSFER DRIVE SPROCKET SUB-ASSEMBLY

a.

Remove the transfer drive sprocket.


Hide 36291A 52.REMOVE TRANSFER DRIVE SPROCKET BEARING

a.

Remove the bearing.


Hide 36231D 53.REMOVE TRANSFER OUTPUT SHAFT PLATE WASHER

a.

Remove the washer.


Hide 36111C 54.REMOVE TRANSFER CASE PLUG

a.

Remove the transfer case plug.


Hide 41331A 55.REMOVE COMPRESSION SPRING

a.

Remove the spring.


Hide 36111G 56.REMOVE PIN

a.

Remove the pin.


Hide 36273 57.REMOVE TRANSFER LOW PLANETARY RING GEAR

a.
F043456

Using a screwdriver, remove the snap ring.


b.

Remove the low planetary ring gear from the front transfer case.