Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 2TR-FE) › from 2020.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261181 COMPRESSOR(for 2TR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 2TR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

a.

for Type A:

i.
E445433

Detach the clamp.


ii.

Remove the screw and cooler bracket.



b.

for Type B:

i.
E447376C01
0,0 0,0 false
V100135

Connector
V100136

Screw


Detach the clamp.


ii.

Disconnect the connector.


iii.

Remove the screw and cooler bracket.



Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E445434E01
0.563,1.302 1.094,1.302 false 0.292,1.24 0.677,1.427 0.385,0.188 10 false SST

a.

Clamp the cooler compressor in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer.

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Detach the connector clamp.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.