88410
1.INSPECT MAGNET CLUTCH ASSEMBLY
Check the magnet clutch operation.
| *a | Component without harness connected
(Magnet Clutch Assembly) |
Apply battery voltage to the clutch and check the operation of the clutch.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 3 (MG+)
Battery negative (-) → Body ground |
Magnet clutch is engaged |
If the result is not as specified, replace the magnet clutch assembly.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 (MG+) - Body ground | 20°C (68°F) | 4.9 to 5.3 Ω |
If the result is not as specified, replace the magnet clutch assembly.