The ECM and urea pump control ECU send and receive signals via CAN communication.
If a communication error occurs between the ECM and urea pump control ECU, the ECM stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| U010E87 | Lost Communication with Reductant Control Module Missing Message | There is no communication between the ECM and urea pump control ECU.
(1 trip detection logic) |
·
ECM ·
Urea pump control ECU ·
CAN Communication System |
Comes on | DTC stored | SAE Code: U010E |
The ECM stores a DTC when a communication malfunction occurs between the ECM and urea pump control ECU.
| DTC No. | DTC Detection Drive Pattern |
|---|---|
| U010E87 | Engine switch on (IG) and wait for 5 seconds or more. |
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
Connect the GTS to the DLC3.
Turn the engine switch on (IG) and turn the GTS on.
According to the display on the GTS, select "Health Check".
Check for currently output system DTCs.
| Result | Proceed to |
|---|---|
| DTC U010E87 is not output | A |
| DTC U010E87 is output | B |
A
B
w/ Central Gateway ECU
w/o Central Gateway ECU