Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › DIESEL THROTTLE BODY › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260462 DIESEL THROTTLE BODY A

1GD-FTV ENGINE CONTROL  DIESEL THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Detach the 2 front clips of the No. 1 engine cover sub-assembly.

A424431C01
0.073,0.073 0.385,0.229 0.313,0.156 10 false *A 3.771,0.094 4.083,0.25 0.313,0.156 10 false *B
*A w/o Urea SCR System *B w/ Urea SCR System



b.

While pulling the No. 1 engine cover sub-assembly towards the front, detach the 2 rear pins, and then remove the No. 1 engine cover sub-assembly.


Hide 17342F 3.REMOVE NO. 2 INTERCOOLER AIR HOSE (w/o Urea SCR System)

A471704C02
1.219,3.823 1.531,3.573 false 1.729,3.563 2.083,3.781 false 1.552,3.458 1.865,3.656 0.313,0.198 10 false *a
*a Retainer


a.

Slide the 2 clips and disconnect the oil return hose.


b.

Detach the clamp.


c.

Release the 2 retainers and remove the No.2 intercooler air hose as shown in the illustration.


Hide 17030 4.REMOVE AIR HOSE ASSEMBLY (w/ Urea SCR System)

Hide 77246C 5.REMOVE FUEL MAIN TUBE SUPPORT

a.
A471702C01
0,2.271 3.427,2.271 false 0.094,0.063 0.406,0.26 0.313,0.198 10 true *A 0.063,2.333 0.375,2.531 0.313,0.198 10 true *B
*A w/ Urea SCR System
*B w/o Urea SCR System


Detach the 2 clamps and disconnect the No. 1 fuel hose and breather hose from the fuel main tube support.


b.

Remove the bolt and fuel main tube support from the diesel throttle body assembly.


Hide 26100G 6.REMOVE DIESEL THROTTLE BODY ASSEMBLY

a.

w/o Urea SCR System:

i.
A471662

Disconnect the connector from the intake air temperature sensor.


ii.
A471664

for Cold Area Specification Vehicles:

Slide the 2 clips and disconnect the No. 11 water by-pass hose and No. 14 water by-pass hose from the diesel throttle body assembly.


iii.
A471663

Disconnect the connector.


iv.

Remove the 4 bolts, intake air connector, diesel throttle body assembly and 2 gaskets.


v.
A345996

Disconnect the connector to remove the emission control valve wire from the diesel throttle body assembly.



b.

w/ Urea SCR System:

i.
A424406

Disconnect the connector and clamp from the intake air temperature sensor and wire harness clamp bracket.


ii.

Remove the bolt and wire harness clamp bracket from the air intake connector.


iii.
A424408

Remove the 4 bolts, air intake connector and 2 gaskets, and then disconnect the diesel throttle body assembly.


iv.

Disconnect the connector.


v.

Detach the clamp, and then disconnect the emission control valve wire from the wire harness clamp bracket.


vi.
A454958

Slide the 2 clips and disconnect the No. 11 water by-pass hose and No. 14 water by-pass hose and remove the diesel throttle body assembly.


vii.
A424409

Disconnect the connector to remove the emission control valve wire from the diesel throttle body assembly.