Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260969 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Reverse Signal Circuit  


DESCRIPTION

for Automatic Transmission

The radio and display receiver assembly receives a reverse signal from the park/neutral position switch assembly.


for Manual Transmission

The radio and display receiver assembly receives a reverse signal from the back-up light switch assembly.


WIRING DIAGRAM

E408554E19
0.781,1.625 6.281,1.823 5.5,0.198 10 false from Back-up Light Switch Assembly*2 0.323,1.229 5.823,1.427 5.5,0.198 10 false from Park/Neutral Position Switch Assembly*1 5.292,2.24 5.823,2.573 0.531,0.333 10 false H92 5.344,1.24 5.875,1.573 0.531,0.333 10 false REV 5.073,1.115 5.604,1.448 0.531,0.333 10 false 28 5.292,2.417 6.531,2.833 1.24,0.417 10 false Radio and Display Receiver Assembly 0.292,3.25 3.677,3.604 3.385,0.354 10 false *2: for Manual Transmission 0.281,2.927 3.667,3.281 3.385,0.354 10 false *1: for Automatic Transmission

PROCEDURE

1.CHECK BACK-UP LIGHT
a.

Move the shift lever to R and check if the back-up lights come on.

OK:

The back-up lights come on.



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)

NG

2.CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL)
a.
E402620C31
1.531,0.354 1.917,0.656 0.385,0.302 2.354,1.458 2.49,1.927 2.49,1.927 2.698,1.927 true 0.177,0.125 0.49,0.323 0.313,0.198 10 false *a 1.604,0.427 1.938,0.677 0.333,0.25 10 false H92 2.75,1.854 3.156,2.083 0.406,0.229 10 false REV
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)


Disconnect the radio and display receiver assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
H92-28 (REV) - Body ground Ignition switch ON
Shift lever in R
11 to 14 V
H92-28 (REV) - Body ground Ignition switch ON
Shift lever not in R
Below 1 V



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR