Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › MONOLITHIC CONVERTER (w/o DPF) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0437690 MONOLITHIC CONVERTER(w/o DPF) A

1GD-FTV EMISSION CONTROL  MONOLITHIC CONVERTER(w/o DPF)  REMOVAL  


PROCEDURE

Hide 17410 1.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 17167 2.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A340282

Remove the 3 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold.


Hide 17271 3.REMOVE NO. 1 TURBO INSULATOR

a.
A340283

Remove the 3 bolts and No. 1 turbo insulator from the exhaust manifold and turbocharger sub-assembly.


Hide 17118 4.REMOVE NO. 2 EXHAUST PIPE SUPPORT STAY

a.
A340284

Remove the bolt, 2 nuts and No. 2 exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 17118 5.REMOVE EXHAUST PIPE SUPPORT STAY

a.
A340285

Remove the 3 bolts and exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 25051 6.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

a.
A340286

Remove the nut, exhaust pipe clamp and exhaust manifold converter sub-assembly from the turbocharger sub-assembly.


b.

Remove the gasket.