Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (for Rear) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260628 EXHAUST GAS TEMPERATURE SENSOR(for Rear) A

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for Rear)  REMOVAL  


PROCEDURE

Hide 89425C 1.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.
A477849C01
0.083,0.083 0.417,0.333 0.333,0.25 10 true *A 0.083,2.5 0.417,2.75 0.333,0.25 10 true *B
*A w/ Particulate Matter Sensor
*B w/o Particulate Matter Sensor


Disconnect the connector from the No. 4 exhaust gas temperature sensor.


b.
A477850C01
0.083,0.083 0.417,0.333 0.333,0.25 10 true *A 0.083,2.417 0.417,2.667 0.333,0.25 10 true *B
*A w/ Particulate Matter Sensor
*B w/o Particulate Matter Sensor


Detach the 2 clamps and disconnect the No. 4 exhaust gas temperature sensor from the sensor bracket.


c.
A477851C01
0.083,0.083 0.417,0.333 0.333,0.25 10 true *A 0.083,2.5 0.417,2.75 0.333,0.25 10 true *B
*A w/ Particulate Matter Sensor
*B w/o Particulate Matter Sensor


Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor from the center exhaust pipe assembly.