Home › Engine / Hybrid System › 1GD-FTV (FUEL) › FUEL INJECTOR › from 2020.08
RM27T0E _51 Engine / Hybrid System _053670 1GD-FTV FUEL _0260590 FUEL INJECTOR G

1GD-FTV FUEL  FUEL INJECTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 23670 1.CHECK INJECTOR ASSEMBLY

a.

Start the engine and drive the vehicle until the engine coolant temperature reaches 60°C (140°F) or higher.


b.

Allow the engine to idle for 1 minute or more.


c.

Connect the GTS to the DLC3.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Engine and ECT / Data List / Injection Volume and Injection Feedback Val. #1 to #4.


f.

Read the values when the engine is idling.


g.

Check that the "Injection Feedback Val. #1 to #4" values are within the specification.

Standard:
Tester Display Engine Condition Specified Condition
Injection Volume Idling 3 to 10 mm3/st
Injection Feedback Val. #1
Injection Feedback Val. #2
Injection Feedback Val. #3
Injection Feedback Val. #4
Idling -5.0 to 5.0 mm3/st


If the result is not as specified, replace the fuel injector assembly.