23810A
1.INSPECT COMMON RAIL ASSEMBLY
Inspect the fuel pressure sensor.
| *a | Component without harness connected
(Fuel Pressure Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 5 (PR) - 4 (E2) | 25°C (77°F) | 16.4 kΩ or less |
| 2 (PR2) - 3 (E2S) | 16.4 kΩ or less | |
| 6 (VC) - 5 (PR) | 3 kΩ or less | |
| 1 (VCS) - 2 (PR2) | 3 kΩ or less |
If the result is not as specified, replace the common rail assembly.
Inspect the pressure discharge valve.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 0.42 to 0.52 Ω |
The temperature indicated in "Condition" is the temperature of the pressure discharge valve.
If the result is not as specified, replace the common rail assembly.