Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0438241 FRONT CAMERA SYSTEM U

CRUISE CONTROL  FRONT CAMERA SYSTEM  TERMINALS OF ECU  


CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the forward recognition camera connector.



a.

Check forward recognition camera

A417823E58
2.063,0.75 2.458,1.01 0.396,0.26 2.115,0.802 2.573,1 0.458,0.198 10 false W22


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
W22-1 (HTR) - W22-10 (GND) Power source Ignition switch ON, forward recognition with heater hood sub-assembly not operating 11 to 14 V
Ignition switch ON, forward recognition with heater hood sub-assembly operating Below 1 V
W22-7 (IGB) - W22-10 (GND) Power source Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
W22-10 (GND) - Body ground Ground Always Below 1 Ω