Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0332058 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LANE DEPARTURE ALERT SYSTEM


NOTICE:

Record the settings when the vehicle is brought to the workshop so they can be restored.


a.

Customizing with the multi-information display

i.

Turn the ignition switch to ON.


ii.

Change the setting of the lane departure alert system by operating the customize switch (steering pad switch).

HINT:

Each lane departure alert system item is displayed on the "Setting" tab on the multi-information display.


Lane Departure Alert System Setting
Display Description Setting
Yaw Assist Yaw assist function setting On/Off
Alert Method of lane departure alert Buzzer/Off
Sensitivity Lane departure alert timing High/Standard
Sway Warning Vehicle sway warning function setting On/Off
Sway Sensitivity Sway warning sensitivity setting High/Standard/Low

HINT:

Some lane departure alert system functions are available only when other functions are operating or enabled. When the following switch and operating conditions are met, each of the lane departure alert system functions are enabled.

LDA Main Switch Yaw Assist Sway Warning

○: Enabled

Lane Departure Alert Function ○ - -
Yaw Assist Function ○ ○ -
Vehicle Sway Warning Function - - ○