Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0332058 LANE DEPARTURE ALERT SYSTEM U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  DATA LIST / ACTIVE TEST  


DATA LIST


NOTICE:

Some Data List values may vary significantly due to slight measurement errors, differences in the measurement environment, and changes in the vehicle over time, making it difficult to indicate clear evaluation standards. It is possible that a malfunction may be present even if measured values are within the reference range.


a.

Read the Data List according to the display on the GTS.

Chassis > Lane Control > Data List
Tester Display Measurement Item / Range Normal Condition Diagnostic Note
Total Distance Traveled - - Not used
Total Distance Traveled - Unit - - Not used
LDA Control Whether lane departure alert system control is permitted or not / Prohibit or Permit Prohibit: Lane departure alert system control not possible
Permit: Lane departure alert system control possible
-
Turn Switch (Right) Turn signal switch (right) status / ON or OFF ON: Turn signal switch on (right)
OFF: Turn signal switch off (right)
-
Turn Switch (Left) Turn signal switch (left) status / ON or OFF ON: Turn signal switch on (left)
OFF: Turn signal switch off (left)
-
Vehicle Information (2WD/4WD) - - Not used
Vehicle Information (Conv/HV/EV) - - Not used



ACTIVE TEST


a.

Perform Active Test according to the display on the GTS.

Chassis > Lane Control > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Meter Buzzer Sounds the meter buzzer Start/Stop Confirm that the vehicle is stopped with the ignition switch ON.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Meter Display 1 Multi-information display OFF or All -