CHECK FREEZE FRAME DATA
The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Radar Cruise1*1 or Radar Cruise2*2 / Trouble Codes.
*1: Output from the ECM
*2: Output from the forward recognition camera
Select the DTCs (with snow icon) for which freeze frame data is recorded.
The operating conditions the moment a DTC is stored are recorded as freeze frame data. Furthermore, only the latest 3 DTCs can be stored by the forward recognition camera.
LIST OF FREEZE FRAME DATA
Radar Cruise1 (for 1GR-FE or for 2TR-FE):
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Cruise Vehicle Speed | Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| Cruise Memory Vehicle Speed | Stored vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Stored vehicle speed | - |
| Cruise Request Throttle Opening Angle | Cruise requested position / 0 to 124.99° | When cruise is set (vehicle in motion at 80 km/h (50 mph)): Actual requested throttle position | - |
| Cruise Target Acceleration | Target acceleration while in cruise control mode / -13.1 to 13.1 m/s2 | Current value displayed | - |
| Driving Support ECU Target Acceleration | Target acceleration of driving support ECU / -13.1 to 13.1 m/s2 | - | This item is displayed on the GTS but is not used. |
| Cruise Request Driving Force | Cruise request torque signal / Min.: -10.00 kN, Max.: 9.92 kN | - | This item is displayed on the GTS but is not used. |
| Cruise Request Driving Force Feedback Status | Cruise request driving force feedback mode / No Control, Suspend, Neg Calc Prohibited, Pos Calc Prohibited, Normal or Increasing at Start | - | This item is displayed on the GTS but is not used. |
| Cruise Control Permission Condition | Cruise control system condition / OK or NG | - | This item is displayed on the GTS but is not used. |
| Cruise Control Condition | Cruise control system active condition / No Control, Constant Speed Control Mode - Ready, Constant Speed Control Mode - Controlling, Vehicle Distance Control Mode - Ready, Vehicle Distance Control Mode - Controlling, Termination Control, :Suspend or Abnormal Stop | - | This item is displayed on the GTS but is not used. |
| Accelerator Pedal | Condition of the accelerator pedal during cruising / ON or OFF | ON: Accelerator pedal depressed
OFF: Accelerator pedal released |
- |
| Stop Light Switch Sub-CPU | Stop light switch signal / ON or OFF | - | This item is displayed on the GTS but is not used. |
| Request Manual Cancel | Whether there is a manual cancel request / ON or OFF | - | This item is displayed on the GTS but is not used. |
| Request Automatic Cancel | Whether there is an automatic cancel request / ON or OFF | - | This item is displayed on the GTS but is not used. |
| Cruise Brake Control Decision | Cruise brake control decision / ON or OFF | ON: Cruise brake activated
OFF: Cruise brake deactivated |
- |
| Cruise Brake Control Permission Condition | Cruise brake control permission condition / ON or OFF | - | This item is displayed on the GTS but is not used. |
| Brake Cancel Switch | Stop light switch status / ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
Radar Cruise1 (for 1GD-FTV):
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Cruise Vehicle Speed | Vehicle speed for cruise control / 0 km/h (0 mph) to 255 km/h (158 mph) | During cruise control: Almost same as meter vehicle speed | - |
| Cruise Memory Vehicle Speed | Vehicle speed when cruise control is set / 0 km/h (0 mph) to 255 km/h (158 mph) | When cruise is set: Vehicle speed when cruise was set | - |
| Cruise Request Throttle Opening Angle | Cruise requested position / 0.00 to 124.99 deg | Changes depending on the conditions of the dynamic radar cruise control system | - |
| Vehicle Acceleration | Acceleration condition while driving the vehicle / -13.10 to 13.10 m/s2 | Current value displayed | - |
| Cruise Target Acceleration | Target acceleration while in cruise control mode / -13.10 to 13.10 m/s2 | Current value displayed | - |
| Driving Support ECU Target Acceleration | - | - | Cannot be used |
| Acceleration Continuation Decision | - | - | Cannot be used |
| Output Driving Force | - | - | Cannot be used |
| Cruise Request Driving Force | Cruise request torque signal / -10.00 to 9.92 kN | Changes depending on the conditions of the dynamic radar cruise control system | - |
| Cruise Request Driving Force Feedback Status | - | - | Cannot be used |
| Cruise Control Permission Condition | - | - | Cannot be used |
| Cruise Control Condition | - | - | Cannot be used |
| Cruise Control Mode | Cruise control mode condition / Vehicle Distance Control Mode, Constant Speed Control Mode | Vehicle Distance Control Mode: Vehicle distance control mode operating
Constant Speed Control Mode: Constant speed control mode operating |
- |
| Cruise Request Gear Position | Shift request from ECM / None or 255 Gear | Shift request from dynamic radar cruise control system | - |
| Cruise Acceleration and Deceleration Operation Condition | - | - | Cannot be used |
| Cancel Switch | CANCEL switch status / ON or OFF | ON: CANCEL switch on
OFF: CANCEL switch off |
- |
| -SET Switch | -SET switch status / ON or OFF | ON: -SET switch on
OFF: -SET switch off |
- |
| +RES Switch | +RES switch status / ON or OFF | ON: +RES switch on
OFF: +RES switch off |
- |
| Cruise Main Switch Operation Condition | Cruise control main switch (ON-OFF) status / ON or OFF | ON: Cruise control main switch (ON-OFF) pushed
OFF: Cruise control main switch (ON-OFF) not pushed |
- |
| Cruise Ready Main-CPU | Dynamic radar cruise control system standby condition / ON or OFF | ON: Cruise control main switch (ON-OFF) pushed
OFF: Cruise control main switch (ON-OFF) not pushed |
- |
| Cruise Ready Sub-CPU | Dynamic radar cruise control system standby condition / ON or OFF | ON: Cruise control main switch (ON-OFF) pushed
OFF: Cruise control main switch (ON-OFF) not pushed |
- |
| Accelerator Pedal | Condition of the accelerator pedal during cruising / ON or OFF | ON: Accelerator pedal depressed
OFF: Accelerator pedal released |
- |
| Cruise Brake Cancel Switch | Cruise cancel signal from the stop light switch assembly / ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Stop Light Switch Main-CPU | Cruise cancel signal from the stop light switch assembly / ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Stop Light Switch Sub-CPU | - | - | Cannot be used |
| Request Manual Cancel | - | - | Cannot be used |
| Request Automatic Cancel | - | - | Cannot be used |
| Cruise Brake Control Decision | Cruise brake control decision / ON or OFF | ON: Cruise brake activated
OFF: Cruise brake deactivated |
- |
| Cruise Brake Control Permission Condition | - | - | Cannot be used |
| Cruise Indicator | Cruise control indicator status / ON or OFF | ON: Cruise control indicator illuminated
OFF: Cruise control indicator not illuminated |
- |
| Wheel Speed Sensor and Deceleration Sensor | Speed sensor signal and deceleration sensor signal condition / Avail or Not Avl | Avail: Speed sensor signal and deceleration sensor signal available
Not Avl: Speed sensor signal and deceleration sensor signal not available |
- |
| Gradient of Road Surface | - | - | Cannot be used |
Radar Cruise2:
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Total Distance Traveled | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | Cannot be used |
| Cruise Control Main Switch | Cruise control main switch (ON-OFF) status / ON or OFF | ON: Cruise control main switch (ON-OFF) pushed
OFF: Cruise control main switch (ON-OFF) not pushed |
- |
| Estimated Vehicle Acceleration | Estimated acceleration condition while driving the vehicle / -5.00 to 5.00 m/s2 | Current value displayed | - |
| Accelerator Pedal Idle | Accelerator pedal idle position signal / ON or OFF | ON: Accelerator pedal released
OFF: Accelerator pedal depressed |
- |
| Forward Vehicle Distance | Distance to preceding vehicle / 0 to 255 m | Current value displayed | - |
| Forward Vehicle Relative Speed | Relative speed against preceding vehicle / -128 km/h (-80 mph) to 127 km/h (79 mph) | Current value displayed | - |
| Cruise Warning Request | Forward vehicle approach warning signal / ON or OFF | ON: Forward vehicle approaching
OFF: Forward vehicle not approaching |
- |
| Accelerator Over Ride | Accelerator pedal position signal during cruising / ON or OFF | ON: Accelerator over ride ON
OFF: Accelerator over ride OFF |
- |