Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260748 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (master cylinder solenoid) operates the stop light switch assembly to illuminate the stop lights.

If the ECM receives a signal from the skid control ECU (master cylinder solenoid) indicating a malfunction of the stop light switch assembly, DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the ECM detects a signal indicating a stop light switch assembly malfunction from the skid control ECU (master cylinder solenoid) for approximately 1 second or more. Vehicle stability control system (for hydraulic brake booster)

PROCEDURE

1.CHECK VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)
a.

Check the vehicle stability control system (for hydraulic brake booster).

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

When P057113 is detected by the dynamic radar cruise control system, C1380 may also be detected in the vehicle stability control system (for hydraulic brake booster). Therefore, check the vehicle stability control system (for hydraulic brake booster) first when P057113 is detected.



Result:
Proceed to
NEXT



NEXT

END