Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.08
RM27T0E _58 Vehicle Interior _091549 PRE-COLLISION _0438246 PRE-COLLISION SYSTEM W

PRE-COLLISION  PRE-COLLISION SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PRE-COLLISION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Make a note of the current settings before customizing.



a.

Customizing with the multi-information display

HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.


i.

Turn the ignition switch to ON.


ii.

Change pre-collision system settings by operating steering pad switch.

Settings
Customize Setting Description Default Setting
PCS Function that turns the pre-collision system on or off On On or Off
Sensitivity Function that selects the warning sensitivity of the pre-collision system function Middle Early, Middle or Late



b.

Customizing with the GTS

i.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
PCS Function ON/OFF State Stored Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 1 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 2 Refer to the table below Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 3 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera

Measurement Item
Customize Setting Description Setting
PCS Function ON/OFF State Stored Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off. Not Stored: Pre-collision system always turns on
Stored: Pre-collision system maintains previous setting
PCS Warning Timing State Stored 1 Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON. Not Stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 2 Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON. Not Stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 3 Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON. Not Stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value