CHECK ECM
Disconnect the C149 and G185 ECM connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*: for Manual Transmission |
||||
| C149-14 (D) - G185-5 (E1)* | B - W-B | Clutch switch signal | Ignition switch ON, clutch pedal depressed | Below 1 V |
| Ignition switch ON, clutch pedal released | 11 to 14 V | |||
| G185-12 (ST1-) - G185-5 (E1) | B - W-B | Stop light signal | Ignition switch ON, brake pedal depressed | 0 to 1.5 V |
| Ignition switch ON, brake pedal released | 7.5 to 14 V | |||
| G185-13 (STP) - G185-5 (E1) | V - W-B | Stop light signal | Brake pedal depressed | 7.5 to 14 V |
| Brake pedal released | 0 to 1.5 V | |||
| G185-26 (CCS) - G185-5 (E1) | B - W-B | Cruise control switch circuit | Cruise control switch off | 1 MΩ or higher |
| Cruise control switch on | Below 2.5 Ω | |||
| +RES switch on | 235 to 245 Ω | |||
| -SET switch on | 617 to 643 Ω | |||
| CANCEL switch on | 1509 to 1571 Ω | |||